![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Sep 14, '05 From London Baby Currently Offline Reputation: 0 (0%) ![]() |
Does anybody here know whether the alternators from the Lexus Models RX300 or GS400 would fit my Gen 6 Celica. I need a larger one as im still struggling with voltage drop from my sound system. Trying to get a similar bolt pattern so i can litterally swap them over, or is it not that easy??
Ideally looking for a 120amp alt, this wouldnt put starin on the engine as its almost double the standard 70 amp one installed currently?? Cheers for any advice ![]() -------------------- Source Unit: Panasonic CQ-TX5500W (Tubular)
Amplification: Genesis Dual Mono x5, Monoblock x1 Processing: Phoenix Gold DD10, Epicentre, UCS Pro, Brax Multicontrollers Speakers: MB Quart QSD, Kenwood Cables: KnuKonceptz, Phoenix Gold Fabrication: Homebase Wood, Dynamat, Old Foam |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Oct 4, '06 From Kelowna, BC Canada Currently Offline Reputation: 3 (100%) ![]() |
Yeah, listening to it too loud for too long
![]() Are you running comps with this setup? Don't you just burp the bass for a second? Or are you using this car as a portable boombox? -------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() Joined Sep 14, '05 From London Baby Currently Offline Reputation: 0 (0%) ![]() |
Yeah, listening to it too loud for too long ![]() Are you running comps with this setup? Don't you just burp the bass for a second? Or are you using this car as a portable boombox? Running 3 way active setup in the front and some 6.5" bass speakers in the rear and then a 12" sub in the boot. I only get the voltage drop when i crank the bass controller up, some times i jus get the urge to vibrate myself into submission, thats when the volts get low 11's whilst the cars on albeit at idle. I been told that if you get into the 10's on voltage thats when amps go poof!! and how u get an avatar? -------------------- Source Unit: Panasonic CQ-TX5500W (Tubular)
Amplification: Genesis Dual Mono x5, Monoblock x1 Processing: Phoenix Gold DD10, Epicentre, UCS Pro, Brax Multicontrollers Speakers: MB Quart QSD, Kenwood Cables: KnuKonceptz, Phoenix Gold Fabrication: Homebase Wood, Dynamat, Old Foam |
![]() ![]() |
Lo-Fi Version | Time is now: June 25th, 2025 - 6:29 PM |