Dnyamatting my doors today, Got a new question see last post Options

[Legit94GT]

So i am dynamatting my doors today, and maybe my rear quaterpanels

Do i want to put all of it on the metal part of the inside of my doors and quaterpanels or on the plastic pieces?

I believe i want it on the metal structure as that will make the most noise, but i just went throught like a million threads and alot of people put it on the plastic parts of the door as well??

Just looking for some other opinions on this...

This post has been edited by Legit94GT: Sep 26, 2008 - 6:07 PM

[Chiefton]

I added extra soundproofing on the outer skin of the door, and then dynamatted the inner skin, but remember once you do the inner skin you wont be able to get to the outter again so make sure you do a good job (may have got that back to front, but you know wot i mean). Make sure all the surfaces are clean, used meth spirit to clean mine, and then heated all sound proofing material up using a hairdryer so it was super sticky, makes it last longer apparently. Neva even touched the plastic bits with sound proofing, and dont get any rattles coming from the door, plus you can do that later if you find you are getting rattles.