20 VALVE HELP, 4age mods/ sus Options

[white97]

I just got done doing my swap and of course a car can never be finished. so i was wondering if anyone who has or had a 4A, has any idea what type of aftermarket stuff to use. Mainly im wondering what kinda clutch and flywheel, cams, and other bolt on mods to go with. also i'm thinking about upgrading my suspension system soon, i was wondering if anyone could help with the right set up to go with for an ST?

[soulshadow]

You can't really upgrade the cams, because it runs on VVT which requires the stock cams to work. You could remove the vvt cams but im not sure if the motor would leak oil or what. As far as Flywheel and Clutch goes you can use whatever works for the 7AFE and 4AGE 16v, since I've compared the 2 and they are pretty much identical to the 20V.

Not much bolt on for the 20V and if you wanted to run ITB's you need an aftermarket Fuel controller or ECU, or a BT ECU with some wire addons.
The Headers are also a tad different from the other 16V since you would have to grind or drill holes to mount it and make it fit.
If you want an aftermarket intake you would need to get an adapter plate for the AFM which you can find at some Auto Parts store or EBAY for cheap.