 TurboCharger project from scrap for Do-IT-Yourself, Turbocharging your car from parts gather |
 Jan 12, 2003 - 10:01 AM
|
 
|
 Enthusiast  Joined Oct 27, '02 From Barbados Currently Offline Reputation: 0 (0%)  |
In Barbados, a lot of guys have put together their turbocharger kit.
This post is to show you in simple terms how easy or hard it is to turbocharged your ride. I believe my USA, AUS and other will find the part more readily available than us here in the Caribbean. Please note that this document is to serve as a reference for your customized job. I am not liable for any damages and problems cause buy this document. I am not a Mechanic, Engineer or have anything relate to the automotive industry. I have been very fortunate to be around Mechanics, Auto Electricians and people doing these projects. Part List: Note pad, Computer or your little brother/sister making notes 1) Meters for monitoring your car. E.g., Temp, Boost, A/R Ratio, pressure and so on. I would recommend Blitz DC Series meters* or any other Power Meter You can also use the Btilz Power Meter i-D http://www.blitz-na.com/PM_ID.htm OR the G-TECH/Pro Competition http://www.gtechpro.com Monitoring tool. 2) New Computer like Autronics, Motec, TEC3 or piggy back computers like the Apex AVC & SAFC 3) Blitz Turbo Timer or any other 4) Ignition Controller with Boost and Timing controls. E.g. Crane Cams (6000-6466 )*, MSD(PN 6520), HKS 5) Ignition Coil. Nology M80*, Crane Cams LS92, MSD PN 8252 6) Nology Plug wires* or TRD, MSD, Crane Cams or any others 7) Iridium Spark Plugs. NGK, HKS 8) Hoses, wire, clamps, cable ties and other stuff you might need as you go along 9) Light Rims like OZ Racing*, Racing Hart, Yokohama Advan* Rims and so on. 10) VeilSide*, MagnaFlow, HKS, Apex or any other exhaust w/ customize 2.5 -3 down pipe. 11) Customized header for the turbo 12) JIC, TRD or others structural braces. 13) JIC Suspension, Ground Control Suspension Include anything here to make you car performer like a street/race car for handling and performance. No ordering here. You are now in turbo world Forge Pistons and Crank if you can. If not, please run low boost <8psi with the small HKS turbo like the GT2510 or even small GT-SS from HKS or Toyota CT20B* Cam Gear from AEM, HKS, JUN or where ever you can get one for your vehicle Celica GTFour turbo CT20B or any other within a 300HP+ specs. All turbos have internal wastegates. Please verify this with HKS first. - HKS GT 2510* or GT2530 or GT2535 - Please give yourself enough room for future HP numbers BOV (Blow Off Valves) from Blitz, HKS, Greddy and others Celica GTFour injectors or new Injectors from RC Engineering (500-550cc) Adjustable Fuel pressure regulator with optional boost inlet. e.g. 2 vacuum ports + fuel in/out - HKS http://www.hksusa.com/products/?id=630 - TRD Intercooler from HKS or some other manufactures. You can also try the GTFour or OEM intercooler from any other car manufactures Piping,hoses and clamps for turbo setup Oil Cooler for cooling the engine oil and piping to carry oil to and from the turbo. Most of All, a lot of research in turbocharging your car. Please take your time in setting up and tuning your car. Short cuts does not get you any way. You may even be ready to offer a custom kit to others once you can get those parts available. Info + Links High Grip Tires (Possibly Dot) Bridgestone Potenza RE01 Japanese tire (Better than the S03) http://babelfish.altavista.com/babelfish/u...lp=ja_en&tt=url http://babelfish.altavista.com/babelfish/u...01%2F01top.html Bridgestone Potenza S03 Yokohama Advan Neova Nitto NT-555 "Extreme ZR http://www.nittotire.com/mainframe.asp http://www.toyoracing.com/ http://www.kumhousa.com/pages/pcr/ev700.htm http://www.kumhousa.com/pages/pcr/vv700.htm http://www.kumhousa.com/pages/pcr/pass_comp.htm Fuel Controller http://www.apexi-usa.com/electronics_safc.asp Ignition Coil http://www.nology.com/profireauto.html Injectors http://www.rceng.com/ http://www.hksusa.com/products/?id=718 TurboChargers (Lite) http://www.hksusa.com/categories/more.asp?id=1092 BlowOff Valves http://www.hksusa.com/products/more.asp?id=792 Boost Controller http://www.apexi-usa.com/electronics_savcr.asp Miscellaneous http://www.blitz-na.com/Blitz_Products.htm http://www.xs-engineering.com/ http://www.motec.com/products/plm.htm Intakes http://www.blitz-na.com/Toyota_Intake.htm http://www.apexi-usa.com/intake_powerintake.asp Radar http://www.beltronics.com/vector990.html http://www.beltronics.com/vector985.html Security http://www.clarion.com/products/security/secure1.htm Muffler http://www.veilside.com/veilsideusa/muffle...r/TiMuffler.htm Electronics Ignition (for your car) http://www.cranecams.com/ignition/hi6trc.htm Rims http://www.ozwheels.com/OZ_html/carWheels.html Far Right under O.Z. Racing http://www.racinghart.com/wheels_rac.asp This post has been edited by west_minist: Jan 25, 2003 - 4:32 PM -------------------- West_Minist
Hydra EMS Dealer & Tuner Subaru ECUFlash Tuner http://www.socob.bb http://xtremeracingtuning.com Viciously Tuned, Driven Hard  |
 |
Replies
|
Jan 18, 2003 - 5:46 PM
|
|
|
Enthusiast Joined Oct 27, '02 From Barbados Currently Offline Reputation: 0 (0%) |
UPDATE
1999 -2004 Toyota Celica Project The aim of this project is to carry the 1999 Toyota Celica ST202 SIII Hatchback to a higher level. To achieve this, major modifications of the chassis, engine and electronics will be undertaken. PARTS Engine VeilSide Titanium Muffler Custom 3 downpipe MoTec M800 MoTec CDI/8 Capacitor Discharge Ignition Nology HotWires HKS Iridium Spark Plugs HKS GT3037S/T04R Turbo HKS Head Gasket (2301-RT035) (Thickness 1.6mm) (Bore 87.5mm) HKS Turbo Header HKS GT II Wastegate (14005-AK001) HKS Racing Blowoff Valve Type II (1421-RA001) Blitz Intake HKS Intercooler HKS / RC Engineering 550cc Injectors on Primary + 500cc Injectors on secondary HKS Fuel System upgrades TRD FPR (Fuel Pressure Regulator #00643-23280-000) JUN GT Surge Tank (2015M-T001) JUN SPROCKET (1033M-T702) OR HKS Cam Gear (2204-RT001) JUN CAMSHAFT KIT (1033M-T005) JUN STROKER KIT (1029M-T003) JUN Racing Valve Guide (1008M-T002) Fearra Valves Toda Racing Lightened Flywheel HKS GD Clutch Pro Multi-Plate Clutch (2604-RT003 [Twin Plate]) ?? Need to be verify with HKS for GTFOUR models. Checkout http://www.fensport.co.uk/partsfiles/st205clutch.htm for clutch kit Kaaz LSD 2way (DAT2010) ?? Needs to be verify with KAAZ for GTFOUR models since this maybe the LSD for the Rear Differential. Suspension Tein Type HA Damper Suspension w/ Camber Plate TRD Strut Tower brace (00602-53607-006) C-ONE Strut Tower brace (FT5360-ST200) TRD Rear stabilising brace TRD Anti-Roll Bars JIC Type 1 Lower Frame Brace (ST202LAB1) Brembo/Wilwood Brakes kit Bridgestone Potenza S03/RE-01/ Bridgestone Potenza 540S/Yokohama Advan Neova/Yokohama Advan A048/Toyo Proxes RA1 Exterior Racing Hart M35 Rims Veilside Front Bumper VeilSide Side Skirts Carcept Rear Bumper VeilSide Rear Wing Interior Blitz DC & BL Series Guages Greddy Air/Fuel Gauge Kit w/ Heated 02 Sensor (16000811) http://www.turboimports.com/gredairgaugk.html Blitz TURBO TIMER- DTT DC II Sparco Seats Momo Steering Wheel Links Page http://www.northwestern.toyota.co.nz http://www.alltrac.net/tuning/engine.html http://www.hksusa.com By phone: (310) 491 3300 - M thru F 8am-5pm PST By mail: HKS USA -13401 S. Main Street -Los Angeles, CA 90061 http://www.apexi.com A'PEX Integration, Inc. 330 W. Taft Orange, CA 92865 (714) 685-5700 Phone (714) 685-5701 Fax Business Hours Monday - Friday 9:00a.m. - 6:00p.m. PST http://www.motec.com West Coast 5355 Industrial Drive Huntington Beach, CA 92649 Tel: (714) 897-6804 Fax: (714) 897-8782 info@motec.com East Coast 169-2 Gasoline Alley Mooresville, NC 28117 Tel: (704) 799-3800 Fax: (704) 799-3874 Jay Caldwell jay@motec.com http://electromotive-inc.com 9131 Centreville Road Manassas, Virginia 20110 Phone: 703 331-0100 Fax: 703 331-0161 Hours: Monday to Friday 9:00am to 5:00pm Eastern Time http://www.autronic.com Phone International (61) 7 4051 6672 Fax International (61) 7 4051 3683 Phone 07 4051 6672 Fax 07 4051 3683 Email info@autronic.com http://www.junusa.com http://www.junauto.co.jp/index-e.html info@junauto.co.jp PHONE 81-3-3920-4165 FACSIMILE 81-3-3594-2689 http://babelfish.altavista.com/babelfish/u...lp=ja_en&tt=url http://www.potenza.jp http://www.bridgestone.com http://www.yokohamatire.com 1-800-722-9888Yokohama Tire Corporation 601 S. Acacia Avenue Fullerton, CA 92831 http://www.toyo.com http://www.toyoracing.com/TireInfo/RA1_tires.asp West Coast: 800-442-8696 (8:00am to 4:45pm PST) East Coast: 888-444-8696 (8:00am to 4:45pm EST) http://www.blitz-na.com Blitz North America, Inc. 4879 East La Palma Avenue Suite 201-202 Anaheim CA 92807, U.S.A (714) 777-9766 Phone (714) 777-9763 Fax Business Hours Monday - Friday 9:00a.m. - 6:00p.m. PST Email Us: Info@blitz-na.com http://www.veilside.com Veilside USA 1250 East 223rd. Street Suite 105 Carson, CA 90745 Phone: (310) 835-5684 Fax: (310) 835-5682 General/Product Info: info@veilside.com http://www.kaazusa.com Newport Exotic Cars 935-A Sunset Drive Costa Mesa, California 92627 USA phone (949) 631-0990, fax (949) 631-0909 newportcars@kaazusa.com http://www.jic-magic.com ZIEL MOTORSPORTS / JIC USA 12229 Woodruff Ave. Downey, Ca. 90241 Tel: 562-803-6122 Fax: 562-803-5012 info@jic-magic.com http://www.todaracing.com Official North American Distributor AKH Trading 192 Technology Drive, Suite V Irvine, CA 92618 USA Tel: 949-450-1056 Fax: 949-450-1059 E-mail: toda@todaracing.com http://www.kumhotire.com http://www.sparcousa.com Sparco Motor Sports Inc. 1852 Kaiser Ave. Irvine, CA 92614 No 1 in The WORLD Tel. 800-224-RACE Fax. 949-797-1755 info@sparcousa.com http://www.carcept.com http://www.trdracing.com Contact Jay Marks Toyota Parts 1 (800) 327-2087 parts@trdracing.com http://www.trdusa.com http://www.trdsportparts.com/ 1-800-688-5913 http://www.momo.it MOMO U.S.A. Inc. 25471 Arctic Ocean Dr. Lake Forest,California 92630 U.S.A. Phone (949)380-7556 Fax (949)380-7256 http://www.rceng.com 1728 Border Ave Torrance, CA. 90501 Phone (310) 320-2277 Fax (310) 782-1346 http://www.racinghart.com Dazz Motorsport 5121 Commerce Drive Baldwin Park, CA 91706-1451 Telephone: (626) 962-0033 Fax: (626) 962-3330 http://www.ozwheels.com O.Z America Inc. 7500 NW 25th St. Unit # A4 Miami, FL 33122 ph 305.471.0042 fax 305.471.7552 info@ozwheels.com For the nearest O.Z racing distributor dial 1.888.OZracing (697.2246) http://www.c-one.co.jp http://www.tein.com TEIN U.S.A.,inc. 7631 Somerset Blvd Paramount CA 90723 PHONE:1-562-633-7387 FAX:1-562-633-7291 http://www.eibach.com http://www.ground-control.com (530) 677-8600 http://www.greddy.com info@greddy.com http://www.cartech.net http://www.fensport.co.uk FENSPORT 8 DOCK ROAD CHATTERIS CAMBS PE16 6RE ENGLAND Tel: +44 (0) 1354 696968 or +44 (0) 7000 336776 FAX: +44 (0) 1354 696973 SALES@fensport.co.uk http://www.gtechpro.com Tesla Electronics 1749 14th Street Santa Monica, CA 90404 (310) 452-0030 support@gtechpro.com http://www.jarcoinc.com/ CANTON, GEORGIA 194 GATEWAY DRIVE CANTON, GEORGIA 30115 Tel: 770.479.4942 Fax: 770.479.4948 Operator: James Stettler info@jarcoinc.com parts@jarcoinc.com halfcuts@jarcoinc.com specials@jarcoinc.com TATEBAYASHI, JAPAN 1090-2 MUJINAZKI, ORA MACHI, ORA GUN GUNMA-KEN 370-0613, JAPAN infojapan@jarcoinc.com partsjapan@jarcoinc.com halfcutsjapan@jarcoinc.com specialsjapan@jarcoinc.com http://www.aprperformance.com APR Performance. Inc 15709 Arrow Highway Suite # 6 Irwindale, CA 91706 Phone: (626) 480-0090 Fax: (626) 480-0030 sales@aprperformance.com http://www.jspamerica.com sales@jspamerica.com info@jspamerica.com webmaster@jspamerica.com To Order 1-716-871-1592 USA Head Office JSP America Inc. 255 Cooper Ave., Suite 100 Tonawanda NY 14150-6641 Tel: (716) 871-1592 Fax: (716) 871-0239 Canada J.S. Parker International 4400 Montrose Rd., Units 2 & 3 Niagara Falls, Ont. L2H 1K2 Tel: (905) 353-1356 Fax: (905) 358-5180 This post has been edited by west_minist: Jun 12, 2003 - 7:07 AM |
Posts in this topic
west_minist TurboCharger project from scrap for Do-IT-Yourself Jan 12, 2003 - 10:01 AM
west_minist Please remember that this project need extraordina... Jan 12, 2003 - 10:07 AM Matthew you can get an exhaust manifold from toyosport. ... Jan 12, 2003 - 4:55 PM NiTTo lol! I was thinking on saying that 2 but i don... Jan 12, 2003 - 4:58 PM x_itchy_b_x sweet thanks for all the sweet links though. im lo... Jan 12, 2003 - 5:12 PM west_minist QUOTE (igotta5S-FEturbo @ Jan 12 2003, 05:55 PM)yo... Jan 12, 2003 - 5:36 PM west_minist Someone ask me what is a piggy back computer.
A p... Jan 12, 2003 - 6:48 PM Matthew let's say that I bought a PECU. How would I p... Jan 12, 2003 - 6:52 PM west_minist Is pretty simple.
once setup, please follow the d... Jan 12, 2003 - 7:04 PM west_minist I do not understand.
Your profile states you have... Jan 12, 2003 - 7:08 PM marcusk they had a topic on celica.net on how you could tu... Jan 12, 2003 - 10:09 PM snadman post that link to that forum markusk Jan 12, 2003 - 10:35 PM rlan214 QUOTE (snadman @ Jan 12 2003, 08:35 PM)post that l... Jan 13, 2003 - 10:43 AM Matthew I am using my stock ecu. I am really interested in... Jan 13, 2003 - 1:39 PM west_minist Ok.
You can either go piggy backing or replace y... Jan 13, 2003 - 7:30 PM west_minist Did anyone find this to be helpful information? Jan 15, 2003 - 8:40 AM boosted_K2 yes very helpful!
I request this as a sticky ... Jan 17, 2003 - 10:08 AM NEVERSTOP west_minist that is a lot of good info... the only... Jan 18, 2003 - 2:49 AM NEVERSTOP QUOTE I have a question though, do you seriously ... Jan 18, 2003 - 2:54 AM west_minist You are right Neverstop.
Some guys seems not to u... Jan 18, 2003 - 7:46 AM Matthew Where would I get the JUN parts. I am in the proc... Jan 18, 2003 - 12:29 PM Mynzeyes new downpipe and up pipe, larger BOV, 3+" exh... Jan 18, 2003 - 12:34 PM jayi12-15psi Tis is all very good information, I really appreci... Jan 18, 2003 - 12:39 PM Matthew QUOTE (Mynzeyes @ Jan 18 2003, 10:34 AM)new downpi... Jan 18, 2003 - 2:35 PM west_minist The veil side will do.
What is the size of the mu... Jan 18, 2003 - 3:35 PM Matthew I am definitely not going to rush into this. I ha... Jan 18, 2003 - 6:13 PM NEVERSTOP QUOTE But that would be nice to see 4bar spitting ... Jan 18, 2003 - 11:26 PM west_minist QUOTE (igotta5S-FEturbo @ Jan 18 2003, 07:13 PM)# ... Jan 18, 2003 - 11:53 PM Matthew my application is a lot of street a little race, ... Jan 19, 2003 - 12:05 AM west_minist Heres go.
Trek sits behind his wheel waiting for ... Jan 19, 2003 - 12:07 AM west_minist QUOTE (igotta5S-FEturbo @ Jan 19 2003, 01:05 AM)my... Jan 19, 2003 - 10:56 AM Charlie97L i think that this topic should be renamed. i had ... Jan 19, 2003 - 12:01 PM west_minist QUOTE (Charlie97L @ Jan 19 2003, 01:01 PM)i think ... Jan 19, 2003 - 12:23 PM Mynzeyes QUOTE (west_minist @ Jan 19 2003, 11:23 AM)QUOTE (... Jan 19, 2003 - 2:09 PM Charlie97L QUOTE (west_minist @ Jan 19 2003, 10:23 AM)One las... Jan 19, 2003 - 2:16 PM west_minist Understand.
My aim wasn't to concentrate on t... Jan 19, 2003 - 3:07 PM west_minist QUOTE (Charlie97L @ Jan 19 2003, 01:01 PM)i think ... Jan 19, 2003 - 3:23 PM Charlie97L QUOTE (west_minist @ Jan 19 2003, 01:07 PM)No prob... Jan 19, 2003 - 4:35 PM west_minist What you you thread be?
Turbocharging a 7AFE?
I ... Jan 19, 2003 - 4:53 PM west_minist QUOTE (Charlie97L @ Jan 19 2003, 05:35 PM)actually... Jan 19, 2003 - 5:17 PM Charlie97L QUOTE (west_minist @ Jan 19 2003, 03:17 PM)That is... Jan 19, 2003 - 6:03 PM west_minist QUOTE (Charlie97L @ Jan 19 2003, 07:03 PM)i'm ... Jan 19, 2003 - 6:36 PM Charlie97L QUOTE (west_minist @ Jan 19 2003, 04:36 PM)You are... Jan 19, 2003 - 7:11 PM west_minist Sounds good.
What turbo are you going to use? CT2... Jan 19, 2003 - 7:17 PM Charlie97L QUOTE (west_minist @ Jan 19 2003, 05:17 PM)What tu... Jan 19, 2003 - 7:57 PM FallenHero I have about 95k miles on my 7a. Will low boost b... Jan 19, 2003 - 11:56 PM Charlie97L QUOTE (FallenHero @ Jan 19 2003, 09:56 PM)I have a... Jan 20, 2003 - 12:37 AM west_minist QUOTE (FallenHero @ Jan 20 2003, 12:56 AM)I have a... Jan 20, 2003 - 3:27 AM west_minist I will try to keep it cheap as possible. But pleas... Jan 20, 2003 - 11:01 PM rlan214 more pls Jan 21, 2003 - 9:52 AM west_minist How do you find it?
What would you like to see fr... Jan 21, 2003 - 10:55 AM Aus The cost of turbocharging a NA celica is so much, ... Jan 21, 2003 - 10:59 AM west_minist QUOTE (Aus @ Jan 21 2003, 11:59 AM)The cost of tur... Jan 21, 2003 - 11:08 AM Aus How cum you have this in USA?? Jan 21, 2003 - 11:10 AM west_minist QUOTE (Aus @ Jan 21 2003, 12:10 PM)How cum you hav... Jan 21, 2003 - 11:25 AM Aus i meant less power, sorry i thought u were from us... Jan 21, 2003 - 11:28 AM west_minist I do not know. That seems to be pretty normal for ... Jan 21, 2003 - 11:32 AM west_minist As I continue to finished up this write up, does a... Jan 24, 2003 - 10:38 AM 3TST I personally found it very helpful.
Keep it up. Th... Jan 24, 2003 - 10:43 AM rlan214 QUOTE (west_minist @ Jan 21 2003, 08:55 AM)How do ... Jan 24, 2003 - 11:47 AM rlan214 4th page Jan 24, 2003 - 11:48 AM rlan214 QUOTE (west_minist @ Jan 21 2003, 09:25 AM)US neve... Jan 24, 2003 - 11:49 AM rlan214 QUOTE (vphmc @ Jan 24 2003, 08:43 AM)BTW: US model... Jan 24, 2003 - 11:54 AM 3TST Looks as if a Turbo kit for a 7A-FE may well be av... Jan 24, 2003 - 11:56 AM west_minist Yeah, the evo. I personally do not like them.
We ... Jan 24, 2003 - 2:32 PM west_minist QUOTE (rlan214 @ Jan 24 2003, 12:47 PM)QUOTE (west... Jan 24, 2003 - 2:36 PM west_minist QUOTE (vphmc @ Jan 24 2003, 11:43 AM)I personally ... Jan 24, 2003 - 2:36 PM Jussimple I just have to say that this is the best thread I ... Jan 24, 2003 - 8:51 PM west_minist If you have the money, buy the blitz Power Meter i... Jan 25, 2003 - 6:23 AM west_minist If anyone want to contact me by email, you can. I ... Jan 26, 2003 - 6:33 PM west_minist Updates links page with http://www.northwestern.to... Jan 28, 2003 - 9:53 PM west_minist I am almost finish the right up. I have just chang... Jan 31, 2003 - 7:05 AM west_minist I am proud to announce that I have purchase the GT... Feb 1, 2003 - 6:02 PM west_minist I am also please to note that I have finish the tu... Feb 1, 2003 - 6:58 PM west_minist Here is a very good link for the 3SGE & 3SGTE ... Feb 2, 2003 - 3:14 PM west_minist Do any one on the forum have close up pics on ther... Feb 5, 2003 - 1:12 PM west_minist Updated info thread with
http://www.jarcoinc.com... Feb 8, 2003 - 8:10 AM west_minist Wings/Spoilers Update.
http://www.aprperformance.... Feb 9, 2003 - 3:14 PM west_minist Found this site in SCC magazine.
I like this site... Feb 14, 2003 - 7:38 PM west_minist To those who want to do a swap using the 3SGTE.
A... Feb 17, 2003 - 7:54 PM west_minist Holley for all of your fuel requirements and more.... Feb 22, 2003 - 4:23 PM west_minist I have spoke to Extremeboost.com on my 3SGE + T en... Mar 6, 2003 - 7:29 PM Matthew thanks for the info.
also do you know where i c... Mar 6, 2003 - 8:57 PM iamblades How the hell are you supposed to see out the back ... Mar 6, 2003 - 10:18 PM Matthew look through the top and bottom Mar 6, 2003 - 10:55 PM iamblades With the size of a that wing, I'd imagine ther... Mar 6, 2003 - 11:07 PM west_minist QUOTE (igotta5S-FEturbo @ Mar 6, 2003 - 8:57 PM) t... Mar 7, 2003 - 7:19 PM west_minist Well, everyone have there opinion.
The new wings ... Mar 7, 2003 - 7:26 PM west_minist This can be review at this thread: http://www.6gc.... Mar 9, 2003 - 8:20 PM west_minist Volk Racing Wheels
Rays Engineering
http://www.m... Mar 15, 2003 - 10:54 AM west_minist This is a quote from Nitto site on a very new rele... Mar 25, 2003 - 6:35 AM west_minist I was reading through the Super Street Magazine an... Apr 12, 2003 - 7:36 PM west_minist I just came across a tire from Japan to rival the ... Apr 18, 2003 - 7:10 PM Matthew to bad i can't read japanese Apr 18, 2003 - 7:32 PM west_minist Here is the translation using http://babelfish.alt... Apr 18, 2003 - 9:00 PM west_minist For sometime, the Header topics keeps on popping u... Apr 28, 2003 - 9:01 PM west_minist Yesterday, I decided to change My 2 Front Toyo Pro... May 17, 2003 - 8:42 PM west_minist Thursday was the first time I drove on wet using m... Jun 8, 2003 - 7:06 PM
west_minist Hi Guys!
I promise you this link on the Bridg... Jun 8, 2003 - 7:56 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 27th, 2025 - 5:09 AM |