Interior Replacement Bulbs/LEDS, Project Underway Options

[3TST]

I have hunted around the forum and found various articles about changing the interior lighting color but really can't find anything on the size of the replacement bulbs/led etc.
I know a few people on the forum have done this so can you help me out please.

So I have started pulling things apart and found the following:

Heater Control Unit
- 2 screw/plug-in type - brown base (with green condoms on)
- 14 green (soldered to pcb)
- 2 orange (soldered to pcb)

Hazard Warning Button
- 1 screw/plug-in type - grey base

Ash Tray
- 1 Wedge type

Ignition Surround
- 1 Wedge type

Lighter Socket
- 1 screw/plug-in type - large grey base

Door Switch (window button)
- 1 green (soldered to pcb)

Problem is I have no idea what size bulbs/leds I need to replace them with.
Do I need resistors?
I've seen a couple of references to web sites selling leds and replacement bulbs BUT Does anyone have part numbers?

Thanks in advance.

This post has been edited by 3TST: Nov 2, 2008 - 6:00 AM

[WWSideWinder]

Hi

I'm doing this conversion of all my dash lights to Blue.

This is what I know so Far

Heater Control Unit
- 2 screw/plug-in type - brown base (with green condoms on) - replace with:T5
- 14 green (soldered to pcb) - As far as I can see thers are 3mm LED's but will have to be removed and replaced
- 2 orange (soldered to pcb) - see above

Hazard Warning Button
- 1 screw/plug-in type - grey base

Ash Tray
- 1 Wedge type - Colored the lense in the ash tray

Ignition Surround
- 1 Wedge type - I replaced this with a Super Bright Blue LSD

Lighter Socket
- 1 screw/plug-in type - large grey base - I will be replacing this with a Super Bright LED

Door Switch (window button)
- 1 green (soldered to pcb) - This is a LED that will have to be replaced.


WWSideWinder