5sfte map sensor issue, tech help Options

[94silverbullet]

I'm trying to get my car on the road again. I have already installed the turbo, exhaust, A/F ratio and boost gauge, helicore ignition wires, oil line, FM inthercoolerand piping, and new plugs gapped to .030.
Things to do:
7mge injector-will arrive tomorrow
MSD 6 BTM- tach harnes adjuster is on the way
2 Bar Map Sensor!
I have been trying to get a 2 bar map sensor installed, but the PN in the sticky is invalid according to the dealership I asked; "2 bar MAP sensor(part# 84420-17030)". I asked about the MAP Sensor for the turbo 93 celicas and he said he cannot look them up without a VIN. I called back a couple of times and had no luck gettin it from the dealership.
So I was on another forum that told me the GM 2 bar map sensor would work.
It doesnt. My car will go to idle but if you touch the gas at all the car trys to stall.
The car ran to the point were I could rev and was only an issue at high rpms or WOT before I had the GM 2 bar MAP sensor.

How can I get the correct 2 bar map sensor that my ecu can understand?