Interior Replacement Bulbs/LEDS, Project Underway Options

[3TST]

I have hunted around the forum and found various articles about changing the interior lighting color but really can't find anything on the size of the replacement bulbs/led etc.
I know a few people on the forum have done this so can you help me out please.

So I have started pulling things apart and found the following:

Heater Control Unit
- 2 screw/plug-in type - brown base (with green condoms on)
- 14 green (soldered to pcb)
- 2 orange (soldered to pcb)

Hazard Warning Button
- 1 screw/plug-in type - grey base

Ash Tray
- 1 Wedge type

Ignition Surround
- 1 Wedge type

Lighter Socket
- 1 screw/plug-in type - large grey base

Door Switch (window button)
- 1 green (soldered to pcb)

Problem is I have no idea what size bulbs/leds I need to replace them with.
Do I need resistors?
I've seen a couple of references to web sites selling leds and replacement bulbs BUT Does anyone have part numbers?

Thanks in advance.

This post has been edited by 3TST: Nov 2, 2008 - 6:00 AM

[jimmykay]

I'm looking into this as well and this is what i've come up with.

Gauge cluster
194 x3
ignition ring
74 x1

Climate Control
194 x3
plus some leds soldered to the board
see this how to
http://www.6gc.net/forums/index.php?showtopic=61249

cig lighter
74 x1
window switch
some led soldered to board

Clock
removed the old plastic and replace it with whatever you need.