Oct 27, 2008 - 8:24 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Mar 8, '08 From Orlando, Florida Currently Offline Reputation: 14 (100%) |
Quite recently I've have this vibration, where the entire car shakes once I'm doing greater than 50+mph in gears 3-5(duh), ONLY during acceleration. Its really weird. I intend to get my wheel balances checked soon, although I have my doubts as this being the shaking stops if i coast/brake at the same speeds. There are no issues with turning etc, as I try not to at 70mph.
Also the problem sometimes disappears for short periods of time, and just that, the vibrating stops! Very odd. I have had my motor mounts changed recently, for the record. Any suggestions? This post has been edited by samir0189: Nov 26, 2008 - 7:39 PM -------------------- ◊◊◊ My F/S Thread! ◊◊◊
QUOTE (14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out. QUOTE Ferdi says (11:29) No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings. |
![]() |
Oct 29, 2008 - 7:03 PM
|
|
|
Enthusiast Joined Oct 17, '08 From Galveston Currently Offline Reputation: 0 (0%) |
I had a problem like this for almost two years, but mine started around 40 m.p.h. and it was loud too. It drove me nuts! (aw man, what an awful pun..) I took it everywhere, replaced my wheel bearings, had my axles rebuilt, rotated, balanced, and replaced tires: all with no luck! Recently I had my transmission and differential replaced and now the noise and the vibration is gone. My friend who did the work said one of the bearings where the axle goes into the differential was all crazy kinds of worn out. But come to think of it, the vibration did get worse with acceleration and was way fainter while coasting. Just a suggestion, I hope you get it worked out!
|
samir0189 Acceleration vibrations Oct 27, 2008 - 8:24 PM
Add45 i have the same problem except mines around 60mph Oct 27, 2008 - 8:35 PM
samir0189 QUOTE (Add45 @ Oct 27, 2008 - 8:35 P... Oct 27, 2008 - 8:38 PM
RickJamesBish I was gonna say, something to do with the motor fo... Oct 27, 2008 - 8:39 PM
samir0189 QUOTE (RickJamesBish @ Oct 27, 2008 - 9... Oct 27, 2008 - 8:42 PM
Add45 my car idles terribly as well Oct 27, 2008 - 8:47 PM
RickJamesBish But if it was an axle, you'd be having this pr... Oct 27, 2008 - 8:50 PM
samir0189 QUOTE (Add45 @ Oct 27, 2008 - 8:47 P... Oct 27, 2008 - 8:54 PM
95celgt yea, have this too, i first changed the motor moun... Oct 28, 2008 - 4:31 PM
CaliJeff QUOTE (95celgt @ Oct 28, 2008 - 2:31... Oct 28, 2008 - 4:39 PM
RickJamesBish I forgot about the tranny, and he's probably r... Oct 28, 2008 - 8:17 PM
Remy If your car shakes going 50+ most likely you just ... Oct 28, 2008 - 8:24 PM
samir0189 Yeah I really need to get the wheels rebalanced to... Oct 28, 2008 - 9:28 PM
CaliJeff Once again, like nutmeg said and I said, i think i... Oct 30, 2008 - 12:18 AM
GotToyota Get them balanced and go from there. That is the f... Oct 30, 2008 - 12:25 AM
samir0189 I had the wheels balanced today. the problem still... Oct 30, 2008 - 3:37 PM
GotToyota Have you considered that it could be the motor mou... Oct 30, 2008 - 8:21 PM
Batman722 QUOTE (samir0189 @ Oct 27, 2008 - 9... Oct 30, 2008 - 8:38 PM
Bitter test for motor mounts:
jack engine up slightly wit... Oct 30, 2008 - 8:43 PM
samir0189 The mounts were changed really just recently, with... Oct 31, 2008 - 12:00 AM
samir0189 A bit of an update i guess:
Today i had a 4 wheel... Nov 3, 2008 - 5:03 PM
samir0189 Well guys, I did some extensive research and i... Nov 3, 2008 - 8:10 PM
Remy ^^^ yes thats true your boots don't have to be... Nov 3, 2008 - 9:56 PM
samir0189 +1 so far. Nov 3, 2008 - 10:11 PM
CaliJeff update? Nov 4, 2008 - 11:22 AM
samir0189 QUOTE (CaliJeff @ Nov 4, 2008 - 12:2... Nov 4, 2008 - 11:25 AM
nnesto I had a similar problem a few years ago it was onl... Nov 22, 2008 - 10:36 AM
samir0189 QUOTE (nnesto @ Nov 22, 2008 - 11:36... Nov 22, 2008 - 2:10 PM
samir0189 WOOT! I fixed it guys! I had both my CV dr... Nov 26, 2008 - 5:35 PM
Cutrara QUOTE (RickJamesBish @ Oct 28, 2008 - 8... Nov 27, 2008 - 12:35 PM![]() ![]() |
| Lo-Fi Version | Time is now: March 19th, 2026 - 3:01 PM |