HID Wiring Options

[CaliJeff]

I checked the old links and practically all the photos are dead. Effin A !
can anybody take some pix of their set up of the wiring? Thanks guys !

Btw, it would help a bunch if it was the same HID kit from the group buy people from culpable or griffgirl

[Culpable04]

the bulb has a black rubber ring that holds a couple wires.


step 1 plug the 2 little plug to the ballast. ( they only fit one way, so no chance of messing up here )
step 2 there is a plug that will fit on the ballast ( again only one will fit, make sure you have the tabs that secure it in place all the way in and on the right side, one side has like a little block, while the other has a slice block ) < does that makes sense ?
step 3 on your case ( H1 ) you 'll have 2 wires with plated endings ( red and black ) these will go where you use to plug your H1 bulb. watch for the right polarity or the HID won't work.

you should be done at this point.


if you need more help. let me know, if extremely necessary I can take some pictures for you, but is cold outside and is 1 am in the morning so I don't want to right now