HID Wiring Options

[CaliJeff]

I checked the old links and practically all the photos are dead. Effin A !
can anybody take some pix of their set up of the wiring? Thanks guys !

Btw, it would help a bunch if it was the same HID kit from the group buy people from culpable or griffgirl

[Culpable04]

so i dont have to hook up any wires to the ground or to the battery?
also step 3 on your case ( H1 ) you 'll have 2 wires with plated endings ( red and black )

on the other end of these two wires is another plug and i dont know where it does. any info?

the other end of those wires, goes to the ballast,

stock harness = red wire \ .....................>.[ } plug to ballast { } the thick wire fixed on the ballast has 2 small plugs at the end those go to the bulb
black wire /



you'd only need to hook up wires to the battery (+) and ground if you were to use a relay kit. if that's what you want the instructions involve a little more work and you have to get a relay kit from autozone or build one yourself for a couple bucks.

instructions for this are straight forward and can be found on the net.

This post has been edited by Culpable04: Nov 3, 2008 - 1:14 AM