Nov 3, 2008 - 5:20 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Aug 17, '04 From California Currently Offline Reputation: 20 (100%) |
I searched the sticky for this but its HUGE and a lot of the the pictures and links are dead... so:
1) where is the factory location of the relay box? in the center console? below the driver pass? just for reference. 2) what does the blue/yellow wire attatch to? is it just a constant 12v source? or is there a coresponding blue/yellow wire in our car somewhere. 3) what way would you guys recomend running the wires through the door? i tried using a coat hangar but it didnt come out the other end where i could reach it. anyhelp on these would be appriciated, thank you! |
![]() |
Nov 3, 2008 - 12:05 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%) |
I did my wiring through the door loom, it looks 100 % stock. I use a hard wire to get wires through.
one thing about my set-up I only had to pass 2 wires to the other side, and did't use the relay box. I have the little control and everything works like stock but without the relay one question : azian, do both of your mirrors start and finish folding at the same time ? mine start at the same time but the driver side always finish first. -------------------- ![]() |
eggman40 Power Folding Mirrors Install have a few questions Nov 3, 2008 - 5:20 AM
azian_advanced 1.
however you'll be missing the bracket ... Nov 3, 2008 - 6:32 AM
eggman40 QUOTE (azian_advanced @ Nov 3, 2008 - 3... Nov 3, 2008 - 2:57 PM
Legit94GT Are these going into a non powered mirror celi?
I... Nov 3, 2008 - 11:59 AM
njccmd2002 one of the mirrors have a longer travel time. Its... Nov 4, 2008 - 7:21 AM![]() ![]() |
| Lo-Fi Version | Time is now: January 14th, 2026 - 2:37 PM |