![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Feb 20, '08 From Abingdon, Maryland Currently Offline Reputation: 7 (100%) ![]() |
So i was driving to school like any other day and when i parked my car, i noticed it seemed like my gears were locked up. I didn't really think much of it and just turned my car off and went to class. Finished class and came back to my car to drive home, *note*-my car was in first when i started it*, so i drove off and all the way home fine, about a 30 mins drive down the highway. When I'm almost home, i stop to get some gas and when i start the car back up, it starts up real shaky and I can't shift into any gears. I turn the car off and notice i can shift through all the gears perfectly when it's off, so i put it in first and start it back up, the car immediately starts moving when i start it. I end up driving the car home in 2nd, not stopping the whole way cause if I do the car will stall. If I shifted gears while driving, it was really rough, like i'm powershifting into gears.
I figure, it's gotta be the low fluids, air in the system, clutch slave, clutch master, or the clutch itself. So I knock out the easy one's first. Fluid was good and I bled the system, still can't shift. Before I go spending any money, I try testing the clutch to see if that is the problem. I start the car in 5th and drop the clutch, the car stalls out right away, so I figured the clutch was still good, especially since it hasn't been slipping or anything lately. I replace the clutch slave, thought what the heck, 19 bucks...didn't help though, so I try replacing the clutch master. Re-bled the system after putting the clutch master in, but that didn't help either. Lastly, I try adjusting the clutch master behind the clutch pedal, thinking maybe it isn't pumping enough fluid, but that didn't make a difference either. The only think I could think it would be is if the line for the fluid between the slave and master is leaking somewhere, but when I press in the clutch and hold it, I notice that the clutch slave is holding constant pressure, so I don't think there is a leak in the line. I am all out of ideas, I'm assuming now that it's something with the clutch, it has to be.... anyone else have any ideas before I take it to the shop to pay massive labor cost? ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 27, '06 From Gainesville Currently Offline Reputation: 3 (100%) ![]() |
Wow I have the exact same problem you do... I went to school then drove home and when I went to go back to school I could start the car in neutral but not put it into gear and if I started it in gear the car would shoot forward. Its clear to me that I need a new clutch but i don't know if I'm mechanicly inclined enough to do it myself
-------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: June 21st, 2025 - 1:18 PM |