 CEL help |
 Nov 2, 2008 - 3:16 PM
|
 
|
|
Enthusiast  Joined Oct 23, '08 Currently Offline Reputation: 24 (100%)  |
I have a 99 gt manual and my CEL came on so i had a friend put a computer on it to see what codes were coming up and i got a P0340 camshaft position sensor A bank 1 malfunction and P0500 vehicle speed sensor A malfunction. When i rev the engine it will go up to 4k and then cut out. I checked the resistance on the cam sensor and it was within limits and the air gap was fine as well. I know the speed sensor is on the trans but unsure exactly where. How can I test the speed sensor. If anyone has any ideas of what to check for please let me know.
|
 |
Replies
|
Nov 16, 2008 - 6:57 PM
|
|
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
can still be a problem with the sensor itself or the circuit, test from the pcm end of things.
-------------------- |
Posts in this topic
bmj67 CEL help Nov 2, 2008 - 3:16 PM
Bitter http://www.obd-codes.com/p0340 Nov 2, 2008 - 4:55 PM bmj67 thanks for the link. it says to check cam position... Nov 2, 2008 - 6:01 PM Bitter iirc it should be an AC voltage that ramps up, spi... Nov 2, 2008 - 7:26 PM hurley97 According to the 97 BGB I have:
P0340 DTC Detectin... Nov 2, 2008 - 8:10 PM bmj67 I checked the resistance earlier and it is within ... Nov 2, 2008 - 8:53 PM Bitter they are fed power on the same circuit, atleast in... Nov 2, 2008 - 9:10 PM bmj67 so does that mean that one can cause the other? Nov 2, 2008 - 9:29 PM Bitter no, that means that they could be related. are yo... Nov 2, 2008 - 10:03 PM bmj67 Well I found that i had a bad crankshaft sensor an... Nov 16, 2008 - 2:52 PM Bitter replace the camshaft sensor. Nov 16, 2008 - 3:37 PM bmj67 The camshaft sensor tests in spec and the air gap ... Nov 16, 2008 - 5:16 PM bmj67 I checked the circuit at the correct pins on the e... Nov 16, 2008 - 8:53 PM Bitter more or less, yes Nov 16, 2008 - 10:15 PM
PizzaGuy01 Sorry for bringing this back from the dead, but di... Jul 29, 2019 - 8:30 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 12th, 2025 - 4:10 AM |