![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Sep 2, '05 From delaware Currently Offline Reputation: 0 (0%) ![]() |
hi guys i have a 5sfte celica i had to replace my clutch out due to the more power from the turbo so i get the car done a start it up and it wont go into gear when first staring and when it does i let off the brake and the car pulls like the clutch isnt fully disengaging i tried bleeding the slave cylinder thinking air was in the system but still has the problem.
i have installed f1 racing clutch stage 2 fidanza lightweight flywheel new throwout bearing bleed slave cylinder put 40w gear oil in transmission adjusted clutch pedal free play |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Aug 12, '07 From Lancaster, Pa Currently Offline Reputation: 35 (100%) ![]() |
the clutch could be set in the transmission wrong too.
-------------------- |
![]() |
|
Enthusiast ![]() Joined Sep 2, '05 From delaware Currently Offline Reputation: 0 (0%) ![]() |
the clutch could be set in the transmission wrong too. when i installed the clutch i checked it to see if it was flush and i checked it with the installation tool and the tool fit in with no problem 3 times and i pulled the boot of the fork and the disk looks center and the pressure plate fingers seem fine |
![]() ![]() |
Lo-Fi Version | Time is now: July 27th, 2025 - 9:52 AM |