 clutch not disengaging |
 Nov 16, 2008 - 6:33 PM
|
 
|
|
Enthusiast  Joined Sep 2, '05 From delaware Currently Offline Reputation: 0 (0%)  |
hi guys i have a 5sfte celica i had to replace my clutch out due to the more power from the turbo so i get the car done a start it up and it wont go into gear when first staring and when it does i let off the brake and the car pulls like the clutch isnt fully disengaging i tried bleeding the slave cylinder thinking air was in the system but still has the problem.
i have installed f1 racing clutch stage 2 fidanza lightweight flywheel new throwout bearing bleed slave cylinder put 40w gear oil in transmission adjusted clutch pedal free play |
 |
Replies
|
Nov 17, 2008 - 7:50 AM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
QUOTE (1994toyotaracer @ Nov 16, 2008 - 6:33 PM)  hi guys i have a 5sfte celica i had to replace my clutch out due to the more power from the turbo so i get the car done a start it up and it wont go into gear when first staring and when it does i let off the brake and the car pulls like the clutch isnt fully disengaging i tried bleeding the slave cylinder thinking air was in the system but still has the problem. i have installed f1 racing clutch stage 2 fidanza lightweight flywheel new throwout bearing bleed slave cylinder put 40w gear oil in transmission adjusted clutch pedal free play the tranny uses 75-90 gear oil, not 40W. if the clutch isnt disengaging, and the slave is working, the problem is prolly the clutch itself. -------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
|
Nov 17, 2008 - 9:22 AM
|
|
|
Enthusiast Joined Sep 2, '05 From delaware Currently Offline Reputation: 0 (0%) |
QUOTE (presure2 @ Nov 17, 2008 - 8:50 AM) QUOTE (1994toyotaracer @ Nov 16, 2008 - 6:33 PM) hi guys i have a 5sfte celica i had to replace my clutch out due to the more power from the turbo so i get the car done a start it up and it wont go into gear when first staring and when it does i let off the brake and the car pulls like the clutch isnt fully disengaging i tried bleeding the slave cylinder thinking air was in the system but still has the problem. i have installed f1 racing clutch stage 2 fidanza lightweight flywheel new throwout bearing bleed slave cylinder put 40w gear oil in transmission adjusted clutch pedal free play the tranny uses 75-90 gear oil, not 40W. if the clutch isnt disengaging, and the slave is working, the problem is prolly the clutch itself. do you think the gear oil would have something to do with it not shifting into gear it works fine when selecting gears when the car isnt running but when i start it it wont go into gear due to the input shaft turning and on the slave cylinder i checked for possible leaks and didnt find any is there any other checks to perform |
|
Nov 17, 2008 - 10:00 AM
|
|
|
Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
QUOTE (1994toyotaracer @ Nov 17, 2008 - 9:22 AM) QUOTE (presure2 @ Nov 17, 2008 - 8:50 AM) QUOTE (1994toyotaracer @ Nov 16, 2008 - 6:33 PM) hi guys i have a 5sfte celica i had to replace my clutch out due to the more power from the turbo so i get the car done a start it up and it wont go into gear when first staring and when it does i let off the brake and the car pulls like the clutch isnt fully disengaging i tried bleeding the slave cylinder thinking air was in the system but still has the problem. i have installed f1 racing clutch stage 2 fidanza lightweight flywheel new throwout bearing bleed slave cylinder put 40w gear oil in transmission adjusted clutch pedal free play the tranny uses 75-90 gear oil, not 40W. if the clutch isnt disengaging, and the slave is working, the problem is prolly the clutch itself. do you think the gear oil would have something to do with it not shifting into gear it works fine when selecting gears when the car isnt running but when i start it it wont go into gear due to the input shaft turning and on the slave cylinder i checked for possible leaks and didnt find any is there any other checks to perform you need to make sure the slave is actually working. have someone step on the clutch pedal, while you verify that the slave cylinder rod is actually moving the clutch fork. -------------------- Former Team 5SFTE pro member ;)
13.6@108MPH, 5SFTE Powered |
|
Nov 17, 2008 - 10:27 AM
|
|
|
Enthusiast Joined Sep 2, '05 From delaware Currently Offline Reputation: 0 (0%) |
QUOTE (presure2 @ Nov 17, 2008 - 11:00 AM) QUOTE (1994toyotaracer @ Nov 17, 2008 - 9:22 AM) QUOTE (presure2 @ Nov 17, 2008 - 8:50 AM) QUOTE (1994toyotaracer @ Nov 16, 2008 - 6:33 PM) hi guys i have a 5sfte celica i had to replace my clutch out due to the more power from the turbo so i get the car done a start it up and it wont go into gear when first staring and when it does i let off the brake and the car pulls like the clutch isnt fully disengaging i tried bleeding the slave cylinder thinking air was in the system but still has the problem. i have installed f1 racing clutch stage 2 fidanza lightweight flywheel new throwout bearing bleed slave cylinder put 40w gear oil in transmission adjusted clutch pedal free play the tranny uses 75-90 gear oil, not 40W. if the clutch isnt disengaging, and the slave is working, the problem is prolly the clutch itself. do you think the gear oil would have something to do with it not shifting into gear it works fine when selecting gears when the car isnt running but when i start it it wont go into gear due to the input shaft turning and on the slave cylinder i checked for possible leaks and didnt find any is there any other checks to perform you need to make sure the slave is actually working. have someone step on the clutch pedal, while you verify that the slave cylinder rod is actually moving the clutch fork. yeah its working i had my dad press the clutch pedal in an out several times and i tested for a leak but fully compressing the clutch and jamming a prybar between the pedal and the seat keeping the slave cylinder out to see if it would leak and after 20 mins it didnt move |
Posts in this topic
1994toyotaracer clutch not disengaging Nov 16, 2008 - 6:33 PM
bslik possibly clutch master or slave cylinder is bindin... Nov 16, 2008 - 8:33 PM
1994toyotaracer QUOTE (bslik @ Nov 16, 2008 - 8:33 P... Nov 16, 2008 - 9:01 PM garin the clutch could be set in the transmission wrong ... Nov 16, 2008 - 9:06 PM 1994toyotaracer QUOTE (garin @ Nov 16, 2008 - 9:06 P... Nov 16, 2008 - 10:05 PM bccentaur3 You didn't put the clutch disc in backwards di... Nov 16, 2008 - 10:14 PM 1994toyotaracer QUOTE (bccentaur3 @ Nov 16, 2008 - 10... Nov 17, 2008 - 7:37 AM Cuts_the_Pilot I had this problem also.
i made a silver steel sla... Nov 17, 2008 - 7:47 AM presure2 QUOTE (1994toyotaracer @ Nov 17, 2008 - ... Nov 17, 2008 - 10:34 AM 1994toyotaracer QUOTE (presure2 @ Nov 17, 2008 - 11... Nov 17, 2008 - 10:43 AM 1994toyotaracer new info
i can put it in gear when the car is off ... Nov 17, 2008 - 12:19 PM GriffGirl It's definitely the clutch then. Maybe you got... Nov 17, 2008 - 1:41 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 25th, 2025 - 4:52 PM |