Intercooler Spray Kit N20 & H20, 3SGTE Heat Soak Options

[Jabberwock]

Hey, I have been reading about N20 Intercooler sprays and WRX's are getting great responses from it with practically no heat soak on the tmic.

I was wondering if this would be good for the 3SGTE TMIC and would it be even better with also a water spray....even though with N20 the water probably would just freeze up.

Furthermore, I read that the N20 lasts a while since it freezes.

I also heard about CO2 but I think N20 is probably more efficient, plus NOS is readily available at shops and refilling would not be a big problem

[zipstrips]

i have a fmic and heat soak is not a problem at all... i also have an nx sprayer and use co2 (its so much cheaper than n20!!!) and does the same thing. i havent notice much of a gain for it.. my boosted honda buddies have the DEI sprayer and they say that it starts to lean there a/f out... a small wet shot could be just as helpful depending on what your building your setup for.

ps. the sprayer is worthless unless your moving. the holes are on top and bottom of the ring so your ic core isnt getting anything on it unless you drive into it so of speak..

This post has been edited by zipstrips: Nov 8, 2003 - 1:12 AM