Sep 13, 2008 - 3:56 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Apr 15, '07 From Fort Worth, TX Currently Offline Reputation: 12 (100%) |
Alright guys, I decided to tackle a project similar to what a member on here did by getting rid of some noise with a carpeting material. I'm attempting the same thing, except with my door panels and rear panels. I went to Home Depot and bought a 6'x9' roll of carpet padding for $30, along with a can of 3M rubber and vinyl spray adhesive. I already tried to deaden the sound a bit by using some extra Dynamat I had, but it didn't help much at all. Spray the door panel on the areas where you will be placing the padding, then rip pieces to the size of your choice and place accordingly. WARNING: You might want to let these panels sit overnight, because the smell isn't too pleasant.
Pics of the materials: ![]() Starting door panel: ![]() Door panel finished: ![]() After I get everything finished I'll let you guys know how well this worked. I spent $40 in materials with tax, so it would be a pretty cheap solution to getting rid of some exterior road noise. Not the prettiest solution, but I feel it should help out greatly. -Matt |
![]() |
Nov 8, 2008 - 6:09 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Mar 3, '05 From Richmond, B.C. Currently Offline Reputation: 0 (0%) |
I tested the duct insulation myself, and found it's not closed-cell foam, so it will soak up water. However, it seems to dry out well.
Keep in mind the Celica already came with a felt pad underneath the carpet, under the rear seats, and attached to the underside of the trunk carpet. |
Nov 19, 2008 - 1:13 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 7, '07 From Portland, Oregon Currently Offline Reputation: 67 (96%) |
I tested the duct insulation myself, and found it's not closed-cell foam, so it will soak up water. However, it seems to dry out well. Keep in mind the Celica already came with a felt pad underneath the carpet, under the rear seats, and attached to the underside of the trunk carpet. Exactly. So as for the foil-backed insulation stuff, you should be good to go with normal use. I'm using it in my car now, and haven't had any problems with it whatsoever, which says a lot considering I'm in the pacific northwest and the ridiculous amount of rain we get here in the winter. Edit: I just read the rest of the thread. I've got a '94, with basically no OEM upgrade options like power windows or upgraded sound system, etc. but I DO have the STOCK sound deadening stuff beneath the carpet. So it's not true that all 94-95s came w/out it. This post has been edited by GriffGirl: Nov 19, 2008 - 1:16 PM -------------------- ![]() |
Nov 19, 2008 - 4:17 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
I tested the duct insulation myself, and found it's not closed-cell foam, so it will soak up water. However, it seems to dry out well. Keep in mind the Celica already came with a felt pad underneath the carpet, under the rear seats, and attached to the underside of the trunk carpet. Exactly. So as for the foil-backed insulation stuff, you should be good to go with normal use. I'm using it in my car now, and haven't had any problems with it whatsoever, which says a lot considering I'm in the pacific northwest and the ridiculous amount of rain we get here in the winter. Edit: I just read the rest of the thread. I've got a '94, with basically no OEM upgrade options like power windows or upgraded sound system, etc. but I DO have the STOCK sound deadening stuff beneath the carpet. So it's not true that all 94-95s came w/out it. I believe the under carpet padding was added to all of the 6gcs regardless of year model. If you owned a newer 6GC you'd know what I was refering to. Sometime after the facelift [or perhaps at the same time I don't remember] they added additional more high tech sounddeadening in response to consumer complaints about the roadnoise in the 6GC. One item they added were these little plastic cubes similar to the underside of the cover of a dot matrix printer [If you can understand what I'm talking about right now you have great intuitive skillz - this is one of those things I can never explain properly without pics or outside assitance]. Ever owned a dot matrix printer? Those things were loud as sin right? The cover that goes over the top that is made of clear plastic - the underside of them were of a cubular sound deadening design. There were similar sound deadening devises added to the newer 6gc's rear body panels. I understand there were other upgrades to the sound deadening but I am unfamiliar with what those other upgrades were. -------------------- ![]() ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
GotToyota Project sound insulation Sep 13, 2008 - 3:56 PM
GotToyota I put the interior back in and put the car to the ... Sep 13, 2008 - 11:55 PM
Coligion QUOTE (GotToyota @ Sep 14, 2008 - 12... Aug 12, 2009 - 12:00 PM
njccmd2002 sometimes cheap works better that expensive.
that... Sep 14, 2008 - 10:44 AM
GotToyota QUOTE (njccmd2002 @ Sep 14, 2008 - 10... Sep 14, 2008 - 1:36 PM
njccmd2002 3 hour job.
1.5 to take out and 1.5 to put in
... Sep 14, 2008 - 1:47 PM
D_Dawg cool idea, ill prob give it a try in the summer. h... Sep 14, 2008 - 9:36 PM
GotToyota QUOTE (D_Dawg @ Sep 14, 2008 - 9:36 ... Sep 14, 2008 - 9:51 PM
CaliJeff did you dynamat the plastic/leather door covers be... Sep 14, 2008 - 10:36 PM
GotToyota QUOTE (CaliJeff @ Sep 14, 2008 - 10... Sep 14, 2008 - 11:26 PM
itssteve well what most people dont understand is that the ... Sep 15, 2008 - 10:50 AM
Galcobar Aye: dampening = weight, to reduce resonance and ... Sep 15, 2008 - 10:29 PM
CaliJeff that sound dampening spray is similar to the stuff... Sep 16, 2008 - 10:26 AM
GotToyota QUOTE (CaliJeff @ Sep 16, 2008 - 10... Sep 17, 2008 - 8:34 PM
dagreat1 one of my celicas is corked dyno matted and foam i... Sep 17, 2008 - 11:59 PM
GriffGirl I've seen that underliner spray - it's ava... Sep 18, 2008 - 6:32 PM
njccmd2002 any updates on the carpet area. I have my carpet ... Sep 19, 2008 - 10:14 AM
GotToyota QUOTE (njccmd2002 @ Sep 19, 2008 - 10... Sep 19, 2008 - 12:04 PM
GriffGirl Gosh, there's just all kinds of responses I ca... Sep 19, 2008 - 12:05 PM
GotToyota I might do my carpeting on Sunday if I feel like r... Sep 19, 2008 - 1:29 PM
njccmd2002 QUOTE (GotToyota @ Sep 19, 2008 - 2... Sep 19, 2008 - 3:05 PM
GotToyota QUOTE (njccmd2002 @ Sep 19, 2008 - 3... Sep 19, 2008 - 3:06 PM
GotToyota Did you put it under your carpet? Sep 20, 2008 - 2:13 PM
njccmd2002 ill post pics later. My car is a mess right now. Sep 20, 2008 - 2:19 PM
GotToyota QUOTE (njccmd2002 @ Sep 20, 2008 - 2... Sep 20, 2008 - 2:23 PM
richee3 Man, my dad does remodeling on houses and we have ... Sep 20, 2008 - 5:25 PM
mitchy finished doing the doors today, havent tested yet ... Sep 21, 2008 - 3:36 AM
GriffGirl Well I put the foil-backed sound dampening stuff t... Sep 22, 2008 - 1:57 PM
dagreat1 imagen how i feel. I got 19's Sep 22, 2008 - 3:50 PM
razor7 I would be careful with that carpet padding. Remem... Sep 24, 2008 - 6:16 PM
Galcobar Putting the padding on the interior side of the we... Sep 25, 2008 - 2:17 AM
dustin15brown sounds like a great idea.... I'm definitely lo... Sep 25, 2008 - 3:35 PM
GotToyota Has anyone else done this yet? I want to see other... Sep 29, 2008 - 3:22 PM
GriffGirl I posted a WTB ad on CL for some carpet pad remnan... Sep 29, 2008 - 6:18 PM
GotToyota QUOTE (GriffGirl @ Sep 29, 2008 - 6... Sep 29, 2008 - 6:24 PM
GriffGirl Good thinking about those quarter panels in the ha... Sep 29, 2008 - 6:55 PM
GotToyota Yeah, I glued some to the back of the panels, as w... Sep 29, 2008 - 7:00 PM
razor7 Alright,
I'm going to use the insulation mater... Sep 29, 2008 - 11:47 PM
gt_driFFter QUOTE (GotToyota @ Sep 15, 2008 - 1... Sep 30, 2008 - 12:41 AM
GotToyota QUOTE (gt_driFFter @ Sep 30, 2008 - 12... Sep 30, 2008 - 10:14 AM
GriffGirl Dynamat is also heavier - which for me, I couldn... Sep 30, 2008 - 12:04 PM
DEATH Mines a '94 [So produced prior to the upgrades... Sep 30, 2008 - 2:21 PM
drmonk3y QUOTE (DEATH @ Sep 30, 2008 - 2:21 P... Oct 9, 2008 - 7:23 AM
njccmd2002 my car is much quieter now and its very paddy, the... Oct 1, 2008 - 12:20 PM
GotToyota This weekend I'm definitely doing the backseat... Oct 1, 2008 - 2:47 PM
RickJamesBish I'd rather get rid of all the annoying creaks ... Oct 3, 2008 - 9:10 PM
njccmd2002 threads are worthless with no pics... Oct 5, 2008 - 7:38 PM
GotToyota Hey, I posted mine.
Looks great. How does it sou... Oct 5, 2008 - 7:53 PM
RickJamesBish WOW, that looks like ****loads of work. Nice job t... Oct 6, 2008 - 8:41 AM
Ugglan love the pics...always good to see how you could d... Oct 6, 2008 - 12:19 PM
razor7 Alright, so I finally got my celica done, and to b... Oct 6, 2008 - 9:34 PM
D-Man QUOTE (razor7 @ Oct 6, 2008 - 9:34 P... Nov 7, 2008 - 12:44 PM
richee3 I just got done putting foam padding in my door pa... Oct 7, 2008 - 12:28 AM
RickJamesBish razor7, I'm only seeing red x's. Oct 8, 2008 - 10:10 AM
GotToyota Yes, you can stick it on top of the factory deaden... Oct 9, 2008 - 4:16 PM
GotToyota I just finished up with adding some of my extra pa... Oct 10, 2008 - 8:48 PM
GotToyota Alright, initial impression is WOW! The rear i... Oct 10, 2008 - 9:34 PM
stephen_lee I used this stuff about a week ago under the carpe... Nov 7, 2008 - 1:09 AM
GotToyota How much did a roll of that stuff cost you? Nov 7, 2008 - 10:28 AM
Culpable04 I paid US$17.04 + tax per roll at Home Depot Nov 7, 2008 - 12:21 PM
stephen_lee QUOTE (Culpable04 @ Nov 7, 2008 - 12... Nov 7, 2008 - 4:41 PM
97celiman whats the wyoming thing from? i would copy and pas... Nov 7, 2008 - 5:04 PM
GriffGirl It's a cut up moving blanket I think Nov 7, 2008 - 6:02 PM
bmj67 Is that foil and foam duct insulation waterproof? ... Nov 8, 2008 - 12:28 AM
richee3 QUOTE (Galcobar @ Nov 8, 2008 - 6:09... Nov 10, 2008 - 8:40 PM

razor7 QUOTE (richee3 @ Nov 10, 2008 - 9:40... Nov 10, 2008 - 9:48 PM
Galcobar Guess the lack of underpad helps explain the lower... Nov 11, 2008 - 7:41 AM
razor7 Alright guys,
Thought I'd finally finish the f... Nov 15, 2008 - 7:46 PM
GotToyota Very nice, thanks for your input Razor. Nov 16, 2008 - 1:58 AM
Ugglan razor: what material did you use? Dynamat (spellin... Nov 16, 2008 - 7:36 AM
stephen_lee razor, how did you do the door panels and about h... Nov 16, 2008 - 1:25 PM
razor7 Guys,
Check page 3 for more photos and more info a... Nov 16, 2008 - 8:21 PM
Ugglan QUOTE (razor7 @ Nov 16, 2008 - 9:21 ... Nov 18, 2008 - 3:11 PM
GotToyota Razor, how heavy is that stuff? Nov 19, 2008 - 10:55 AM
stephen_lee QUOTE (GotToyota @ Nov 19, 2008 - 11... Nov 19, 2008 - 3:24 PM
RickJamesBish Are you talking about those cube things in the doo... Nov 19, 2008 - 4:21 PM
DEATH Hadn't noticed them in the doors but I did not... Nov 19, 2008 - 4:23 PM
GriffGirl ^He's too young to know what a dot matrix prin... Nov 19, 2008 - 4:48 PM
RickJamesBish That's true, they're also by the rear spea... Nov 19, 2008 - 4:58 PM
stephen_lee my 94 has factory sound deadening. felt under the ... Nov 20, 2008 - 12:57 AM
stephen_lee update! today a lot was done.
foil/foam was p... Dec 8, 2008 - 1:57 AM
richee3 QUOTE City driving 0-40 was partially quieter, wor... Dec 8, 2008 - 7:14 PM
stephen_lee Gravel roads are nearly silent now, too Dec 8, 2008 - 9:45 PM
97celiman wait so when you say foil and foam...what are you ... Dec 8, 2008 - 11:30 PM
Galcobar QUOTE (97celiman @ Dec 8, 2008 - 8:3... Dec 9, 2008 - 1:02 AM
97celiman right so that was the foil you could buy that was ... Dec 9, 2008 - 1:29 AM
stephen_lee i did the foil/foam duct insulation first, then th... Dec 9, 2008 - 1:41 AM
mariosdarkworld So did anyone do the roof yet? I did my roof only ... Aug 10, 2009 - 1:12 PM
Harold_Fastwaker QUOTE (mariosdarkworld @ Aug 10, 2009 - ... Aug 11, 2009 - 4:05 PM
razor7 QUOTE (Harold_Fastwaker @ Aug 11, 2009 ... Aug 11, 2009 - 4:23 PM
stephen_lee i've done it. yes it is quite hard to get the ... Aug 11, 2009 - 4:46 PM
Harold_Fastwaker QUOTE (stephen_lee @ Aug 11, 2009 - 5... Aug 11, 2009 - 8:19 PM
Culpable04 the vibration from inside the door can be fixed by... Aug 12, 2009 - 2:33 PM
richee3 What about doing the roof with a sunroof? Anyone d... Aug 12, 2009 - 10:07 PM
Harold_Fastwaker QUOTE (richee3 @ Aug 12, 2009 - 11:0... Aug 13, 2009 - 12:35 AM
richee3 QUOTE (Harold_Fastwaker @ Aug 13, 2009 ... Aug 13, 2009 - 3:06 PM
mariosdarkworld I did 2 layers on the roof n it fit fine didnt hav... Aug 13, 2009 - 2:07 AM![]() ![]() |
| Lo-Fi Version | Time is now: October 24th, 2025 - 6:46 AM |