Question regarding wheel spacer/offset, i need help picking which wheel spacer to use! Options

[ej8ferio702]

ok so i want to put wheel spacers to get that wider look and get my wheels flush with the body,right now im rolling on a stock corolla-S 15 inch rims and it looks like its tucked in, my car is not dropped but looking to drop it with tanabe df210 soon, my question is how thick of a wheel spacer do i need to achieve that wider/flushed look?? any help and or suggetions? also where can i buy wheel spacers? any good brand in particular? any brand i should stay away from? all info regarding this topic will be greatly appreciated..

heres how it looks at the moment


heres how the rims look like,sorry for the low quality pic..

[ej8ferio702]

Yes, there is a conversion table, it's in the stickies.

Wheel offset guide.

Basically, first thing you need to know is what offset your current rims are. After that, you need to know where you want your wheels to be. Then just buy the proper spacer. If you go anything thicker than a 10mm spacer, you should use extended wheel studs.

thanks for your help! i didnt know that, i was looking to use 25mm spacer for the rear and 15 for the front... does anybody know a good quality brand and part numbers?