Interior Replacement Bulbs/LEDS, Project Underway Options

[3TST]

I have hunted around the forum and found various articles about changing the interior lighting color but really can't find anything on the size of the replacement bulbs/led etc.
I know a few people on the forum have done this so can you help me out please.

So I have started pulling things apart and found the following:

Heater Control Unit
- 2 screw/plug-in type - brown base (with green condoms on)
- 14 green (soldered to pcb)
- 2 orange (soldered to pcb)

Hazard Warning Button
- 1 screw/plug-in type - grey base

Ash Tray
- 1 Wedge type

Ignition Surround
- 1 Wedge type

Lighter Socket
- 1 screw/plug-in type - large grey base

Door Switch (window button)
- 1 green (soldered to pcb)

Problem is I have no idea what size bulbs/leds I need to replace them with.
Do I need resistors?
I've seen a couple of references to web sites selling leds and replacement bulbs BUT Does anyone have part numbers?

Thanks in advance.

This post has been edited by 3TST: Nov 2, 2008 - 6:00 AM

[Kotass]

Hey every1, I´ve just finished with mine dashboard but results are not as expected so I´ll try to change diods to achieve better results.

I do have Alpine 9886R which has red buttons and white display and therefore I´d like to have everything as combination of these two colours.
Will use mine lighter as USB slot for memory cards because I´m non-smoker. I´ve changed three main bulbs on dashboard for LED´s (each worth approx. 1,5 $) and my friend make the change on heat control panel (including work 10 $). The heater for rear window has own diod and therefore it´s much more brighter than rest.

This is most probably not the final version because I´m not satisfied. At least I do know how to take into parts dash board.