![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Feb 19, '08 From Anaheim,CA Currently Offline Reputation: 2 (100%) ![]() |
im planning on lowering my car but i dont know what to get. I was looking at these coilovers but i dont know if theyre any good. Do they just go in place of our springs? And how would it look if it was lowered 2.0 front 2.0 rear?
http://www.slickcar.com/productdetails.asp?ProductID=1309 i wanna lower it asap -------------------- lol
|
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 25, '05 From Fort Wayne, IN Currently Offline Reputation: 14 (100%) ![]() |
Yeah, definitely don't skimp out if you go coil overs. The half-a**ed ones like those you posted utilize stock struts (or stock replacement) and as such won't be properly valved for the setup.
On the cheap, you can just slap a set of springs in there like Tein S-Techs or any of the other brands. If you've got the coin, full pillow ball upper coil overs are the only way to fly, but it's gonna cost ya around $900-1K min. -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Feb 19, '08 From Anaheim,CA Currently Offline Reputation: 2 (100%) ![]() |
Yeah, definitely don't skimp out if you go coil overs. The half-a**ed ones like those you posted utilize stock struts (or stock replacement) and as such won't be properly valved for the setup. On the cheap, you can just slap a set of springs in there like Tein S-Techs or any of the other brands. If you've got the coin, full pillow ball upper coil overs are the only way to fly, but it's gonna cost ya around $900-1K min. what if i get better shocks? or should i just get new springs and shocks? This post has been edited by BeefyT: Nov 25, 2008 - 11:31 AM -------------------- lol
|
![]() ![]() |
Lo-Fi Version | Time is now: August 22nd, 2025 - 6:38 PM |