![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Oct 2, '08 From New Zealand Currently Offline Reputation: 0 (0%) ![]() |
Hi All
This the work I have done today on my Car My Old Battery Leads ![]() Engine Bay ![]() New Battery ![]() Positive Terminal ![]() Negative Terminal and Temporary Ground Wire (Will be replaced with Blue 4 Gage Cable When I do the BIG 3) ![]() New 8 Gage Cable and 60Amp Fuse for Sub ![]() I'll be taking photos of my New Blue Interior tonight when it's dark. ![]() This post has been edited by WWSideWinder: Sep 1, 2009 - 4:36 AM -------------------- WWSideWinder - 1996 - 3S-FE - Auckland New Zealand
![]() ~ signature made by jaws4god ~ Have a look at my thread for updates on my progress. "http://www.6gc.net/forums/index.php?showtopic=63338&hl=0" |
![]() |
![]() |
|
Enthusiast ![]() Joined Oct 2, '08 From New Zealand Currently Offline Reputation: 0 (0%) ![]() |
New Stuff
This week-end I made 2 changes to my car. 1) I shorted my Auto Gear selector by about an inch thus giving me quicker shifts ( ![]() 2) I have fitted an electric boot/trunk release to go with the key and Cable release that was standard on my car. With (2) I was hoping to tie it in with my alarm system but sadly I don't think it will work. Now all I have to do is find a rely good push switch and a good location (thinking of the coved up hole in the dash Drivers Side or the round think next to the driver's vent) for the boot/trunk release Suggestion on Locations and types of push switches most welcome. Also any one know of a Toyota push switch I might use. -------------------- WWSideWinder - 1996 - 3S-FE - Auckland New Zealand
![]() ~ signature made by jaws4god ~ Have a look at my thread for updates on my progress. "http://www.6gc.net/forums/index.php?showtopic=63338&hl=0" |
![]() ![]() |
Lo-Fi Version | Time is now: August 20th, 2025 - 2:26 AM |