3sgte in a st202, need help whith the engine swap!! Options

[robertof30]

hey guys i bougth it a 3sgt engine. transmission and ecu , i have my st202 and i want to know what i really need if i have to buy a different motor,transmission mounts and what else do i need to do the swap,i`m kind of new in this .

[DEATH]

If you have an ST-202 [Which I doubt] then your motor mounts are already setup for the 3S-GTE 2.0l Turbo engine since you must already have a 3S-GE 2.0l engine in there. However, the info next to your name says you have an ST which is an AT200 1.8l 7A-FE.
Furthermore, your info says NJ which I will take as to mean New Jersey where ST-202's were never imported.
I'm not trying to give you sh*t and personally, if you want to believe you drive an ST-202, it's no skin off my back, however, it does have a huge bearing on your question. Like for example - what Playr stated is true. You will need the GT mount on the PS to complete your swap. You also can not use your tranny, Axles, etc. If you want the answer to your question to be correct we're gonna have to know what you really own.

Here - this may help you understand:
http://www.6gc.net/information/3

This post has been edited by DEATH: Dec 4, 2008 - 12:59 PM