question on front strut bar Options

[Toyota_Celica_97]

hi everyone i have an question on how to install the front strut bar.

do i need to jack the car up? and do the the wheel and all those other stuff need to come off? cause i got an c-one front bar with 3pts, i heard that if i took off all 3 screw the wheel and other stuff on it might fall off.

like help.

of a step by step on how to do it will helps alot.

P.s. : i already try the search thing and there not much of a use info on this.

[bccentaur3]

Step 1- pop your hood.
step 2- look at the strut tower, you'll see 3 nuts on both sides of the towers. They are near the fenders and fire wall. You'll see them. Remove the 6 nuts assuming you don't have a factory strut bar.
step 3- If you do have a factory strut bar you will see 2 bolts in the center of the engine bay on the firewall bolting down the factory strut bar. Remove those 2 bolts.
Step 4- put on your 3 point and bolt down the nuts and apply the 2 center bolts for the center part of the strut bar onto the firewall.