6G Celicas Forums

Welcome Guest ( Log In | Register )

> 3SGE Build up, VlaCelica need info
post Nov 10, 2003 - 8:11 PM
+Quote Post
west_minist



Enthusiast
***
Joined Oct 27, '02
From Barbados
Currently Offline

Reputation: 0 (0%)




VlaCelica Quote from http://www.6gc.net/forums/index.php?act=ST...=100#entry73624

"I got a question tough. I got a 3SGE engine that is about 175 hp stock (thats what is listed here in the netherlands, but i believe the engine should be 170 hp). What is the best (and cheapest) way to gain a bit more power without turbo charging it ? My goal is about 200 hp, and i want a faster 0-60 time. Stock its 8 seconds, and i want about 7 seconds. Got any tips on this one ?

Also, if i would have alot of money, cant i just replace all the parts of my 3SGE engine with parts of the GT4 3SGTE (3rd gen) engine ?? Is this possible or do i need major adjustments to do this ?"

I believe that every car should be fully tuned. Spark plugs, oil, filter change and so on.

Please let me know how you normally drive.

I use to drive flat out all the time. Now, I am trying to save gas. Sometimes, I have a little fun. But when I get serious, I crank the fuel up and lets have it.

Look forward to your reply before I answer.

This post has been edited by west_minist: Nov 10, 2003 - 8:20 PM


--------------------
West_Minist

Hydra EMS Dealer & Tuner
Subaru ECUFlash Tuner
http://www.socob.bb
http://xtremeracingtuning.com

Viciously Tuned, Driven Hard

 
Start new topic
Replies
post Nov 11, 2003 - 2:43 AM
+Quote Post
VlaCelica

Enthusiast
*
Joined Nov 10, '03
From Netherlands
Currently Offline

Reputation: 0 (0%)




Well to answer ur question. I drive very relaxed... normally my rpm is between 3000 and 4000. This is cause i have to drive a lot every day to my work and back. There is no need for some extra power there. But, in the weekends i like to go all the way.

So it would be nice 2 have drivability comfort, but also some more power for the times i want to. Thats why my goal aint 250 or 300 hp like some others. I just want some more acceleration and power in the lower RPM's. I was thinking of getting HKS camshafts, camgears and valve springs. Together with a Jun flywheel, an apexi air intake and a HKS silent high power exhaust system. I think this will help me get some more power, just dont know it for sure.

But those mods cost about the same as a Top Fuel turbo kit. But i wonder if the Top Fuel kit is enough to fit right. Cause it doesnt have an intercooler, and i think i would have to tune more stuff to make it work right. And that will cost me a lot more.

Any advice is appreciated.

PS, that small turbo sounds good, but are there any complete kits that i can buy that includes everything i need 2 make it work right without problems ? Got any websites where i might purchase such turbokit ?


This post has been edited by VlaCelica: Nov 11, 2003 - 2:45 AM

Posts in this topic
- west_minist   3SGE Build up   Nov 10, 2003 - 8:11 PM
- - Rivo   lol, few ways you could go. More aggressive cams w...   Nov 10, 2003 - 8:28 PM
- - west_minist   the degree of cams would cause some problems. 264 ...   Nov 10, 2003 - 8:33 PM
- - VlaCelica   Well to answer ur question. I drive very relaxed.....   Nov 11, 2003 - 2:43 AM
- - west_minist   My advice to you is to get an Autronics SM or SM2 ...   Nov 11, 2003 - 1:09 PM
- - VlaCelica   QUOTE (west_minist @ Nov 11, 2003 - 6:09 PM) My ad...   Nov 12, 2003 - 12:58 PM
- - west_minist   It depends on what parts you are looking for. My u...   Nov 12, 2003 - 4:32 PM
- - Aus   i was going to ask the same question - guess you b...   Nov 12, 2003 - 5:52 PM
- - west_minist   Any new cams with make you rev a little more to ge...   Nov 12, 2003 - 6:26 PM
- - VlaCelica   QUOTE (west_minist @ Nov 12, 2003 - 9:32 PM) ...   Nov 13, 2003 - 1:25 AM
- - Aus   QUOTE (west_minist @ Nov 12, 2003 - 11:26 PM) The ...   Nov 13, 2003 - 7:07 AM
- - Aus   oh...and i forgot to ask, how much difference does...   Nov 13, 2003 - 7:58 AM
- - Kwanza   QUOTE (Aus @ Nov 13, 2003 - 5:58 AM) oh...and i fo...   Nov 13, 2003 - 2:50 PM
- - west_minist   All true! To keep the revs there, do not see ...   Nov 13, 2003 - 5:46 PM
- - Aus   QUOTE (west_minist @ Nov 13, 2003 - 10:46 PM) To ...   Nov 14, 2003 - 7:20 AM
- - west_minist   Why do want to lightened the flywheel and still bo...   Nov 14, 2003 - 11:23 AM
- - scothaniel   You may want to contact Fensport or TDI in the UK....   Nov 16, 2003 - 4:01 PM
- - VlaCelica   QUOTE (scothaniel @ Nov 16, 2003 - 9:01 PM) You ma...   Nov 17, 2003 - 12:58 PM
- - scothaniel   Possibly? Not exactly sure. Do you have the tra...   Nov 18, 2003 - 12:14 AM
- - VlaCelica   QUOTE (scothaniel @ Nov 18, 2003 - 5:14 AM) Possib...   Nov 18, 2003 - 1:46 PM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: September 14th, 2025 - 6:07 PM