![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Nov 21, '05 From Wpg, MB. Canada Currently Offline Reputation: 3 (100%) ![]() |
I did a quick search, and for the most part, no one knows for sure. Just lots of speculation and opinions.
Maybe we can put this to rest (or if it's been done, just point me to it. ![]() Are the oem skirts interchangable? Does the verts fit the hatches/coupe and vice versa? Is it the same part #? |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Jul 10, '06 From South Carolina Currently Offline Reputation: 6 (88%) ![]() |
You have to cut some of the bracing out of the underside of the skirt, the entire length, since the vert is super-reinforced along its lower edge where the skirts go. Also, the holes will not line up at all, so you do need to drill new holes. I went with just three, one in each wheelwell, and one in the middle right under the door. A little plastic putty, sanding and painting, and you can't see the screws.
The stock regular side skirts will not fit the vert without that backside channel modification. Samantha |
![]() ![]() |
Lo-Fi Version | Time is now: June 9th, 2025 - 10:01 PM |