 from Auto to Standard, tranny swap |
 Nov 10, 2003 - 8:32 PM
|
 
|
 Enthusiast Joined Oct 18, '03 From Kaneohe, Hawaii Currently Offline Reputation: 0 (0%)  |
hey does anybody know the exact parts needed to convert my car to standard. Im planning to go to a junkyard at the end of this week.
|
 |
Replies
|
Nov 11, 2003 - 8:15 PM
|
|
||
 Enthusiast  Joined Aug 29, '02 From Franklin/Nashville, TN Currently Offline Reputation: 16 (100%) |
the slave cylinder *should* be on the tranny, also, for the clutch pedal, you will need the bracket to hold the clutch pedal arm, as it is not in the automatic car. also, with the pedals, be sure you get all the springs and pins and bolts and all. i have an extra set of all the pedals/springs/pins/etc needed EXCEPT for the clutch pedal bracket.  . also, you will need a shifter assembly, then the lower console piece with the shift boot, and also a knob. (i also have a stock shifter assembly w/ shift knob, if you need that.) PM me if you're interested.  .-John- -------------------- AIM==Mynzeyes
 |
||
Posts in this topic
AWDcelicaTURBO from Auto to Standard Nov 10, 2003 - 8:32 PM
Supersprynt You might wanna hold up until u do ur swap? Nov 11, 2003 - 1:22 AM Stipt Shifter, master and slave cylinders, shifter cable... Nov 11, 2003 - 6:38 AM NEVERSTOP QUOTE Shifter, master and slave cylinders, shifter... Nov 11, 2003 - 11:59 AM Stipt I figured that was a dead give away AND A TRANSM... Nov 11, 2003 - 8:03 PM
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 14th, 2026 - 2:11 PM |