 5SFE tapping, valve tapping and wont stop |
 Dec 27, 2008 - 11:55 AM
|
 
|
 Enthusiast  Joined Jan 16, '07 From covington, KY Currently Offline Reputation: 9 (77%)  |
I have a quite large problem one of my valves is tapping im not low on oil and i just rebuilt it about 1k miles ago, about 3 days ago it had a slight tap when above 3k RPM checked the oil fine, then 2 days ago it started at 2k RPM checked oil fine, now it has a slight tap at idle, and the car is idling rough. When revving it up it gets louder and starts to have more of a grind then a tap. I removed the valve cover and checked the cams and valve jackets and there all fine, cranked the engine a couple of time couldn't see anything wrong, i have work here later so i dont have time to remove the cams so i thought someone might be able to help before i dig further.
Thanks |
 |
Replies
|
Dec 27, 2008 - 1:31 PM
|
|
|
Enthusiast Joined Jan 16, '07 From covington, KY Currently Offline Reputation: 9 (77%) |
its a valve i know that much and im not burning oil and yes i rebuilt the whole thing the only original parts r the cams
|
Posts in this topic
hatchy_gt-s 5SFE tapping Dec 27, 2008 - 11:55 AM
enderswift its gets louder with revs? did you just redo the h... Dec 27, 2008 - 12:57 PM enderswift oh yea i just saw your other thread about the oil ... Dec 27, 2008 - 1:14 PM hurley97 Did you check the valve clearances? If it's ge... Dec 28, 2008 - 11:57 AM hatchy_gt-s oil pump is new, bearings are new/checked oil clea... Dec 28, 2008 - 8:59 PM hurley97 I understand everything is new since you said you ... Dec 29, 2008 - 12:20 AM hatchy_gt-s checking oil clearance is when u use the plastigau... Dec 29, 2008 - 5:16 PM Batman722 who rebuilt the motor ? Dec 29, 2008 - 5:56 PM hatchy_gt-s i did Dec 29, 2008 - 7:16 PM Batman722 valves are messed up bucko Dec 29, 2008 - 9:24 PM hatchy_gt-s it been clearing up tho? Dec 29, 2008 - 9:48 PM hurley97 If you don't want to take anyone's advise ... Dec 31, 2008 - 6:23 PM
hatchy_gt-s No its not like that, I am taking the advice, but ... Jan 1, 2009 - 12:40 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 22nd, 2025 - 1:51 AM |