![]() |
![]() |
![]() |
|
Enthusiast Joined Jan 21, '08 From ON. Canada Currently Offline Reputation: 0 (0%) ![]() |
Im planing to do a 3SGTE swap into my 98 Celica GT and i just wanna get something straight.
The 3SGTE is all wheel drive so do i have to get the rear diff. drive shaft and all that and covert my car to all wheel or is it possible to just drop the 3SGTE engines and use some toyota tranny and leave it front wheel drive? I read on some site that the GT-S tranny works with the 3SGTE engine is that true? |
![]() |
![]() |
|
Enthusiast Joined Jan 21, '08 From ON. Canada Currently Offline Reputation: 0 (0%) ![]() |
This question is for the Canadian members. I live in toronto, Ontario. Does anyone know of a good shop that will do the 3SGTE swap in the GTA area. If yes, and you have done it how much did they do it for?
|
![]() |
|
![]() Enthusiast ![]() ![]() Joined Oct 11, '05 From Ajax, Ontario Currently Offline Reputation: 2 (100%) ![]() |
This question is for the Canadian members. I live in toronto, Ontario. Does anyone know of a good shop that will do the 3SGTE swap in the GTA area. If yes, and you have done it how much did they do it for? I'm in Toronto and I've been looking around too, ask Bryan (valo666) I think he may know somewhere -------------------- ![]() |
![]() |
|
Enthusiast Joined Jan 13, '09 From scotland Currently Offline Reputation: 0 (0%) ![]() |
hey guys just found this site thought i would give use a hand with this one
iv got a st202 with a rev3 3sgte in it, i do it my self with help from local garage im useing a mr2 turbo gear box converted to run fwd which also means it just a gt4 cluch that im useing so its all the same kit dont have to change parts over, another thing is u will need the GT4 bonnet and front bumper if u are useing the charge cooler as the st202 bonnet wont close but if u get a front mount intercooler then u can still use st202 bonnet and bumper, if there is anymore uses need to know just ask cheers |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 10:02 PM |