WTB: Compatible spacers for TRD shifter Options

[Starcraftjunkie]

Hi,

I've managed to find someone selling a TRD shifter, but it's only that.. no spacers, no metal clips, nothing else. I'm wondering if anyone has extra spacers or one's they're not using. I'm thinking that the spacers for all the short shifters should be fairly universal. However, feel free to correct me if I'm wrong.

Can I use washers instead? If so, how many?

This post has been edited by Starcraftjunkie: May 4, 2006 - 2:25 AM

[97lestyousay]

Here you go.


Diameters in inches.



Step heights in inches


The top also has a chamfer on it. It goes about 1/2 way from the .588 step
to the .356 hole on top surface. Not shown.

This post has been edited by 97lestyousay: May 4, 2006 - 8:54 PM

[BloodyStupidDave...]

Here you go.


Diameters in inches.



Step heights in inches

Were those measurements made from the stock marshmallow bushing or from a genuine trd bushing? Are 4 or 8 items needed per shifter? Because I can't get those numbers to work for me. The way I can get the numbers to work with 4 items is as follows:

option1: 0.200 => 0.02
option2: 0.383 => 0.200 & 0.200 => 0.364 & 0.588 => 0.709

With 8 items per shifter, I still can't get the numbers to work. One solution is:

0.383 => 0.200, 0.200 => 0.182, 0.588 => 0.709

Can someone who has the TRD bushings clarify how many bushings there are and post some measurements please?