 removing driveaxle, help |
 Mar 5, 2007 - 2:20 PM
|
 
|
|
Enthusiast Joined Feb 22, '07 From Philadelphia Currently Offline Reputation: 0 (0%)  |
im trying to remove the driver side drive axle from the transmission and it wont budge. its a 95 st, 7a-fe 1.8L. i already removed the axle from the hub but cant get it out of the transmission. it will move a little bit in and out of the transmission but nowhere close to coming out. is it bolted down somewhere? or is there a clamp thats holding it in or should i just try and pry it out. im afraid of breaking something if its still being held in by something.
|
 |
Replies
|
Jan 20, 2009 - 3:06 PM
|
|
 Enthusiast  Joined Apr 18, '05 From Calgary Currently Offline Reputation: 20 (100%) |
you will need a press to swap the axle carriers.. before that you'll need a relatively large pair of snap ring pliers to get the snap ring off from the carrier bearing.. or if you have a set of small picks and a small flat screwdriver you can do it without snap right pliers, but that will take some skill
 .other than that, everything else should be pretty straight forward. -------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- |
Posts in this topic
95celly removing driveaxle Mar 5, 2007 - 2:20 PM
My2Celi i went to autozone and rent myself a puller, it ha... Mar 5, 2007 - 2:36 PM 95CelicaRacer The right side has a locking ring on it, and it ca... Mar 5, 2007 - 2:42 PM
95celly QUOTE(95CelicaRacer @ Mar 5, 2007 - 7... Mar 5, 2007 - 2:48 PM 95CelicaRacer What I meant you could do is after you have remove... Mar 5, 2007 - 2:59 PM 95celly and that wont damage the locking ring on the drive... Mar 5, 2007 - 3:01 PM 95CelicaRacer No, It won't hurt the locking ring. Just make... Mar 5, 2007 - 3:06 PM 95celly i took the axle out of the passenger hub and it is... Mar 5, 2007 - 3:48 PM My2Celi why not try my way? The slide hammer will help you... Mar 5, 2007 - 4:10 PM 95celly im going to auto zone tomorrow to get one, i figur... Mar 5, 2007 - 5:46 PM Negative Be careful. My friend royally screwed up the Diff ... Mar 5, 2007 - 6:08 PM Salica Im about to change my passenger side driveaxle im ... Jan 20, 2009 - 12:44 PM Agent21 That ring comes out way easy with a screw driver. ... Jan 20, 2009 - 5:53 PM blu94gt Should just pry out. Get a good pry bar to pry be... Jan 21, 2009 - 3:42 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 7th, 2025 - 10:17 PM |