![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Mar 8, '08 From Orlando, Florida Currently Offline Reputation: 14 (100%) ![]() |
Hey everyone,
My celi's always had a leak for as long as i can remember, but just one or two drops, nothing major. now... ![]() I have some pics of underneath the car, the leak is more passenger side on the ground. ALOT of oil is settled on this thing ![]() And the whole backside of the engine block appears shiny. (doesn't look shiny in pics though..) ![]() And this is the oil pan, it appears to be really oily, but idk if thats cause the oil settled there or if it originated fromthere. ![]() Any ideas? I can take more pics if need be. THANKS everyone! ![]() -------------------- ◊◊◊ My F/S Thread! ◊◊◊
QUOTE (14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out. QUOTE Ferdi says (11:29) No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings. |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jan 16, '07 From covington, KY Currently Offline Reputation: 9 (77%) ![]() |
ok so ya, well because the engine sits at a slant the oil from the valve cover is going to leak to the back side, so i would remove the valve cover (requires a 30mm socket) and check the gasket/replace. those 2 hoses are the power steering lines(the actual pump is on the lower backside of the engine)
So i would just replace the valve cover and the pan gasket if its still there PM me and i will help u dont have to remove the cross member just use a 1/4in wrench with extension with a swivel on a shallow socket This post has been edited by hatchy_gt-s: Jan 28, 2009 - 3:02 PM |
![]() ![]() |
Lo-Fi Version | Time is now: September 13th, 2025 - 12:24 PM |