 Can someone tell me how to take this off!?, stiffener plate? blocking the oil pan... |
 Jan 31, 2009 - 6:23 PM
|
 
|
 Enthusiast  Joined Mar 8, '08 From Orlando, Florida Currently Offline Reputation: 14 (100%)  |
trying to get the oil pan out to reseal, but its being a pain.
the front motor mount is out. crossmember is pushed to the side, there is working room, but this bolt holding this shield is not removable, and there is a big metal arm and the shield held by it which is blocking the pan. 
This post has been edited by samir0189: Jan 31, 2009 - 8:26 PM -------------------- ◊◊◊ My F/S Thread! ◊◊◊
QUOTE (14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out. QUOTE Ferdi says (11:29) No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings. |
 |
Replies
|
Feb 6, 2009 - 8:31 PM
|
|
|
Enthusiast Joined Feb 6, '09 From Florida Currently Offline Reputation: 0 (0%) |
Samir, I have already torn my engine down to the block from above, but now I am having the same problem as you. I removed the front engine mount and disconnected the front crossmember. How did you get the crossmember to swing away to get to the bottom bolt blocked by it?
|
Posts in this topic
samir0189 Can someone tell me how to take this off!? Jan 31, 2009 - 6:23 PM
eggman40 It looks like that bracket that goes over that bol... Jan 31, 2009 - 7:03 PM samir0189 i understand what you mean. Its just that the othe... Jan 31, 2009 - 7:34 PM Batman722 it's the intake manifold stay (support).
Like... Jan 31, 2009 - 11:17 PM samir0189 thanks guys i got it taken care of. Feb 1, 2009 - 7:17 PM
samir0189 QUOTE (jbspeed @ Feb 6, 2009 - 8:31 ... Feb 7, 2009 - 8:30 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 18th, 2025 - 12:36 PM |