![]() |
![]() |
![]() |
|
Enthusiast Joined Jan 28, '09 From Knoxville, TN Currently Offline Reputation: 0 (0%) ![]() |
Hello,
Just bought this 99 GT, but its been wrecked in the past. Is there any easy trick to getting the hood bumber lined up without taking the bumper off? I only ask cause it looks like the bumper is glued to the fenders on both sides. Some shaddy body work. The passenger side bumper needs to move up about a 1/4 inch. This post has been edited by sbrile: Feb 10, 2009 - 7:30 AM |
![]() |
![]() |
|
Enthusiast Joined Jan 28, '09 From Knoxville, TN Currently Offline Reputation: 0 (0%) ![]() |
So I tried loosening up the screws mentioned to see if the front end could be pushed into the correct position, but its definetly not moving any closer. So I did some measurements. The distance between these frame pieces is different. Forgive me I don't know what there called so I snagged a picture from another post to illustrate. The distance on passenger side is ~2.25 distance on the driver side is ~2.00. Don't see anyway to adjust it.
Link to picture ![]() This post has been edited by sbrile: Feb 10, 2009 - 7:44 PM |
![]() ![]() |
Lo-Fi Version | Time is now: July 24th, 2025 - 10:29 AM |