6G Celicas Forums

Welcome Guest ( Log In | Register )

> ECU Harness, red/white wire goes where?
post Feb 18, 2009 - 7:27 PM
+Quote Post
6gsillyca



Enthusiast
***
Joined Jan 13, '06
From UnderTheGround403
Currently Offline

Reputation: 2 (100%)




So I pulled my ECU yesterday, and in the process I accidentally pulled one of the pins out...

Hoping one of the wiring guru's can help me out and tell me where this belongs.

 
Start new topic
Replies
post Feb 20, 2009 - 2:25 AM
+Quote Post
korban

Enthusiast
*
Joined Feb 5, '09
From New Zealand
Currently Offline

Reputation: 0 (0%)




If it's the same as some wiring i've done, there are 2 red/white wires in the large plug, Injector 1 and the power for the oxygen sensor heater.

Also in the middle plug there is a red/white for a diagnostics line to the 'check' connector. The air temp wire might be red/white too, but I was using an aftermarket one.

Does your car run? If you haven't tried, don't until you post a wireside pic. If you have do you have any error codes or lights on your dash?

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: October 27th, 2025 - 3:47 PM