Feb 23, 2009 - 2:01 PM
|
|
|
Enthusiast ![]() Joined Nov 16, '08 From eagle pass Currently Offline Reputation: 1 (100%) |
so i just got the ssiii foglights and i dont know how to mount them
the car dont have a bracket or nothing to mount them n **** so any help can do me good |
![]() |
Feb 23, 2009 - 8:33 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Feb 16, '07 From BP, MN Currently Offline Reputation: 7 (100%) |
If you look into the front gap of the bumper, you should see the crash bar directly above and behind the front bumper. (Long silver rectangular bar) There should be some pre-drilled holes in there already, you just have to choose which position you want the fogs to be at. If you were lucky you'd have a mount and some screws to fit. Keep in mind how the fogs mount and the placement of the holes otherwise you'd have to start drilling new holes. Or invert the mount and mount it, fabricate new mounts, etc.....
Wiring wise, I'm pretty sure there's a stock wire harness if you're lucky that should be plug and play with the fog light staulk rather than your regular light staulk by the steering wheel. Otherwise you can buy custom fog light wiring and wire it yourself, which are mostly found with fog lights from Wal-Mart, Autozone, Pep Boys, etc.... and a switch to turn them on and off whenever you want to. If you go this route, keep in mind when you wire it that it's safer for future usage to tap into the ignition system. When the car is off it's a safe bet that your fog lights won't still be on and drain your battery like my fogs did to me countless time because I keep forgetting to turn them off. This post has been edited by ZGear: Feb 23, 2009 - 8:43 PM -------------------- ![]() |
joseluis007 how do i instal fog lights? Feb 23, 2009 - 2:01 PM
BonzaiCelica wow. wait you have a 94 celica, but you got the ss... Feb 23, 2009 - 7:47 PM
joseluis007 yea i just got a 96+ bumper and the fog lights
and... Feb 23, 2009 - 10:26 PM
ZGear For your safety sake, get a crash bar. (are you ta... Feb 23, 2009 - 10:38 PM
trdproven how do you know u dont have one. brackets mount u... Feb 23, 2009 - 10:51 PM
ej8ferio702 if you have a 94 bumper there are pr drilled holes... Feb 23, 2009 - 11:23 PM
trdproven I cannot confirm but yes there are two holes on ea... Feb 24, 2009 - 6:30 AM![]() ![]() |
| Lo-Fi Version | Time is now: November 18th, 2025 - 5:39 PM |