 getting sick of this, cant figure it out |
 Feb 28, 2009 - 5:02 PM
|
 
|
|
Enthusiast  Joined Mar 10, '08 From Ct Currently Offline Reputation: 0 (0%)  |
ive posted about this before. My car has high idle, roughly 2000 rpm. read about all this in the forums and came to the comclusion it was my IAC. got my IAC replaced the othyer day, no diffrence.
found the vaccum diagram for the 5s and checked mine out. everyhting was good. except for the PS assist valve. the "nipple" type things were semi broken on that. now im ok with engines, not a complete expert but i can do pretty good. i dont know what else could make my idle as high as it is, could timing, belt tension, advanced or retarded ignition timing have any effect on this? i just want my car to opperate as it should. im only a teen so i dont have too much money to play with, but any experience & help towards my problem is greatly appriciated. |
 |
Replies
|
Mar 3, 2009 - 6:04 PM
|
|
|
Enthusiast Joined Mar 10, '08 From Ct Currently Offline Reputation: 0 (0%) |
yeah it moved fine
|
Posts in this topic
6gcnoob getting sick of this Feb 28, 2009 - 5:02 PM
presure2 QUOTE found the vaccum diagram for the 5s and chec... Feb 28, 2009 - 5:52 PM 6gcnoob when i put my motor in they snapped off and i fixe... Feb 28, 2009 - 6:18 PM
presure2 QUOTE (6gcnoob @ Feb 28, 2009 - 6:18... Feb 28, 2009 - 6:27 PM 6gcnoob ok. so this will make my idle normal though. Feb 28, 2009 - 6:38 PM stephen_lee if thats ur problem, yes Feb 28, 2009 - 11:54 PM 6gcnoob so i got around to pluging those lines.nothing hap... Mar 1, 2009 - 4:26 PM netrata re-trace all your vacuum lines and verify that the... Mar 1, 2009 - 10:44 PM stephen_lee completely cover that hole, if the engine dies the... Mar 2, 2009 - 2:52 PM 6gcnoob what do you mean try force closing the throttle?
... Mar 2, 2009 - 3:10 PM stephen_lee like you would open the throttle from the engine, ... Mar 2, 2009 - 3:29 PM 6gcnoob sounds like a plan, il give it a whirl when i have... Mar 2, 2009 - 3:49 PM soulshadow Check your IAC gasket. Mar 3, 2009 - 2:57 PM Remy When you replaced your IACV did you get a new one ... Mar 3, 2009 - 3:13 PM 6gcnoob for the IACV gasket, no. i got a used one, and i j... Mar 3, 2009 - 3:39 PM 6gcnoob heres some pics. dont know how much of a help they... Mar 3, 2009 - 3:53 PM stephen_lee bc the engine died with it covered the valve is op... Mar 3, 2009 - 4:04 PM GriffGirl You need to get the code for your CEL. I bet the C... Mar 6, 2009 - 5:53 PM Rayme Did you check for the throttle cable that would be... Mar 6, 2009 - 6:01 PM Remy QUOTE When you replaced your IACV did you get a ne... Mar 6, 2009 - 10:00 PM korban Get a timing light and check your timing at idle, ... Mar 7, 2009 - 4:57 AM 6gcnoob throttle cable is just fine. i took off the IACV a... Mar 8, 2009 - 12:26 PM Remy QUOTE (6gcnoob @ Mar 8, 2009 - 12:26... Mar 8, 2009 - 5:12 PM 6gcnoob yup. stupid mistake and over thinking . thanks for... Mar 8, 2009 - 9:37 PM Remy Thats good to know you can go back to enjoying you... Mar 9, 2009 - 11:29 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 22nd, 2025 - 1:08 PM |