Camber kits, CHEAP---- Options

[TRD6GC]

This has been very briefly covered before but i figured i would make sure everyone in the 6GC community knows. If you want a camber kit you can order through a Toyota dealership. They actually have them, they call them CRASH BOLTS. There are three different kinds, one with one dot, two dots, and three dots on them. All the dots represent are the amount of degrees allowed in the camber adjustment. I will try to find the part numbers (i cant remember who gave them to me) and then ill post back. But they are only like 7 dollars a bolt. (You need one or two bolts per wheel, pending on how much adjustment is needed) So they are cheap, and work perfectly...........Hopefully this helps out a lot of people.

[BonzaiCelica]

When ever you get 4 wheel alignment, the place doing it will put them on for you if needed, but i don't know how much they are.

I bought my spc camber bolts for $60 dollars ya i know expensive, online is like $45. You only need 1 camber bolts for each strut.

Check out this video it shows you how to do it. http://www.youtube.com/watch?v=7mYi5BupEoM

I installed df210 and kyb gr2 on my own. When i went to get alignment, the right front strut was pretty good not off at all. My other 3 struts were off some but not enough to the point where they had to use the spc camber bolts that i bought/provided for them to use if necessary. And i got lucky cause alignemnt was $70 and they would have charged me an additional $20 a strut if they would of use the camber bolts.

Before and the actual= after.


hmm pics aren't working trd6gc. did you happen to delete them from photobucket account?

This post has been edited by BonzaiCelica: Mar 7, 2009 - 4:41 PM