 st205 3s-gte throttlebody to intercooler joiner, Made of rubber?? Has anyone made an adaptor to use a silicone joiner? |
 Mar 8, 2009 - 7:52 PM
|
 
|
 Enthusiast  Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%)  |
The mouth of the throttle body on the st205 is weird, it's like a rubber bolt on piece that clamps on the other side to the intercooler, mine is kinda worn so I'm wondering what I should use to make a proper mouth and use a silicone joiner, do I need something custom welded up or is there something I can buy cheap or what?
If it needs to be welded, has anyone done this and have the dimensions or a plan? Please post pictures, thanks. -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
 |
Replies
|
Mar 8, 2009 - 9:14 PM
|
|
|
Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
I want to keep my stock top mount water2air, there isn't a whole lot of clearance there (assuming this is why they have a bolt on rubber joiner instead of a TB mouth.) Will that still fit? I think there is just enough space for a flange plate and less than an inch to fit a clamp on the TB side.
-------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
Posts in this topic
delusionz st205 3s-gte throttlebody to intercooler joiner Mar 8, 2009 - 7:52 PM
Cuts_the_Pilot I make billet aluminium adapters that take 2.5... Mar 8, 2009 - 8:33 PM
Cuts_the_Pilot if your keeping the stock wta you only choice is t... Mar 9, 2009 - 9:10 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 25th, 2025 - 3:14 PM |