![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 20, '07 From Bakersfield, CA Currently Offline Reputation: 10 (100%) ![]() |
*********OEM Seats $100 Complete set or $50/rear; $50/front OBO
![]() ![]() ![]() ![]() ********OEM Side Markers $15 (can be wet sanded for OEM look) ![]() ********OEM LH Turn Signal $10 (Can be wet sanded for OEM look) ![]() ********OEM Springs $30 ![]() ********Stock Lug Nuts $5 ![]() *******Rear Wiper Motor & Blade Arm $50 ![]() ![]() -------------------- 91 MR2 Turbo SW20, 92 MR2 Turbo SW20, 95 Celica GT ST204
![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Jun 10, '08 From Virginia beach Currently Offline Reputation: 8 (100%) ![]() |
hey, im liking the side markers and turn signals. but do you only have the LH? not the RH side as well?
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 20, '07 From Bakersfield, CA Currently Offline Reputation: 10 (100%) ![]() |
hey, im liking the side markers and turn signals. but do you only have the LH? not the RH side as well? Sorry, I have the RH one, but no lens because it got damaged from when I hit my fender really hard. sorry to thread jack, how did you get your wiper off??? I messed w mine for like 30 minutes before i just ended up cutting the damn thing off Well I had bought this one in perfect condition thinking i Needed a new one. LOL Truth be told, I just had to tighten down the nut after messing with the wiper blade by positioning it. From what I can see, it seems a bit easy to disassemble, but something like a putty knife would be needed to pull that rubber seal up over and then get under the hatch and disassemble from there as well. I am not looking at the parts and going off of my memory from when I had last looked at it, but that is what I would imagine. I could be wrong. -------------------- 91 MR2 Turbo SW20, 92 MR2 Turbo SW20, 95 Celica GT ST204
![]() |
![]() ![]() |
Lo-Fi Version | Time is now: August 21st, 2025 - 4:26 PM |