3S-GE with Turbo Options

[ksporry]

Has anyone ever fitted a 3S-GE with a turbo (after market or otherwise)?
I have seen threads which suggest doing an engine swap to 3S-GTE and then install a turbo, but I don't want to do any engine swaps. Has anyone done this before? If so, what's the best way of working and what kits can I use?

[jeffrosie]

Easy to do if you want to turbo your std engine.

First check that the engine is in good health.
If all OK, then start collecting parts.
- 3SGTE map sensor
- Walbro fuel pump http://cgi.ebay.co.uk/WALBRO-255-LPH-FUEL-...tem280324380566
- bigger injectors
- 3SGTE rev3 exhaust manifold & rev3 turbo
- Then you need one of these http://cgi.ebay.co.uk/TOYOTA-CT9-CT12-CT20...tem250398618719
- And this http://cgi.ebay.co.uk/Ultralite-Sandwich-p...tem350164250052
- Then modify your sump with this http://cgi.ebay.co.uk/AN-8-AN8-AN-08-Male-...tem150329257289 for oil drain
- Correct length AN4 steel braided hose
- Correct length AN8 Steel braided hose
- Downpipe Decat http://cgi.ebay.co.uk/Celica-GT4-MR2-3SGTE...tem250371213362
- And dont forget this http://cgi.ebay.co.uk/Toyota-MR2-MK2-TURBO...tem120405031709
- Connect all this to a 2.5" or 2.75" system
- Decent front mount intercooler and 2.5" intercooler pipes
- Heavy duty clutch
- Then get a piggyback ecu like the emanage ultimate or what ever your preference

Sure there is probably a couple more items to add