 Quick: I've got 2 half moon metal things and my valve cover off, w |
 Apr 13, 2009 - 8:05 PM
|
 
|
|
Enthusiast  Joined Nov 29, '07 From Colorado Currently Offline Reputation: 4 (100%)  |
As the title implies. I've got these two metal half moon washers that the parts guy recommended when I ordered the gasket for my valve cover. I've got the cover off and am ready to put everything back together. Where do these things go?
TiA! This post has been edited by aspen: Apr 13, 2009 - 8:09 PM -------------------- 2019 M2, 2005 S2000, 1997 4Runne
|
 |
Replies
|
Apr 16, 2009 - 10:20 PM
|
|
|
Enthusiast Joined Sep 19, '08 From Michigan Currently Offline Reputation: 4 (75%) |
The half moon cam plugs are always directly in line with the cams. The half moon "holes" in the head are necessary in order to line-bore the cam bearing saddles. The only heads that don't have them are the ones where the bearing saddles are above the "deck" level, i.e. the level of the perimeter valve cover seating surface.
|
Posts in this topic
aspen Quick: I've got 2 half moon metal things and my valve cover off, w Apr 13, 2009 - 8:05 PM
95CelicaST Here? Apr 13, 2009 - 9:08 PM aspen No. They are 'Cam Plugs' as a quick part n... Apr 14, 2009 - 8:13 PM aspen Also, I'm now noticing there was some silicon-... Apr 14, 2009 - 9:08 PM Sinyk You need this:
How far were you digging in your... Apr 15, 2009 - 10:47 AM 95CelicaST USDM GT would have a 5S. When I did the valve cove... Apr 15, 2009 - 6:00 PM LewFX theres washers where the spark plugs would go into... Apr 15, 2009 - 6:04 PM Sinyk The only things I had were the 4 nuts and then und... Apr 16, 2009 - 11:01 AM hurley97 The half moons are in the head itself, right next ... Apr 16, 2009 - 9:03 PM
Sinyk Aaah, I know what you are talking about now. Apr 17, 2009 - 11:10 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 20th, 2025 - 7:04 PM |