![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Mar 11, '09 From Baltimore, Maryland Currently Offline Reputation: 1 (100%) ![]() |
Hi all, Two days ago the check engine light came on. When I drive for 5 min the light comes on.
![]() I have a 3sgte out of a Caldina (ST215) and the use the stock JDM ECU, so I can't get codes from it. I don't see anything leaking and the car runs great. I have put about 800 miles on the car since i did the swap. What should I check first? |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Aug 9, '06 From Ma Currently Offline Reputation: 1 (100%) ![]() |
You have to check the codes, otherwise you're just wasting time.
You should still have a diagnostic box on the harness, unless whoever installed the engine got rid of it. If you have the box, jump TE1 and E1 and see if the CEL flashes a code. If it does, post it up, if not, do you have a the wiring pinouts for the ECU? -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: June 26th, 2025 - 3:12 PM |