6G Celicas Forums

Welcome Guest ( Log In | Register )

> new plugs & wires now hesitation at high boost, Borg warner plug wires crap?
post May 4, 2009 - 11:51 PM
+Quote Post
mk7celica

Enthusiast
**
Joined Feb 2, '09
From new orleans La.
Currently Offline

Reputation: 5 (86%)




So I have oem 5sfe plug wires on my 3sgte and wanted toyota oem plug wires but my dumb ass got some from a local parts store.There borg warner wires and they was special ordered. I figured borg warner makes good turbos, so they must make good plug wires. I installed them and a new set of ngk bkr7 plugs. Had irodium paid over 30 for them and they sucked. Any ways the car hesitates now at high boost. I checked all the wires and they are tight and are connected good. So I cant figure out whats wrong. I did not touch anything else on the car but the plugs and wires. Cant fix the issue. I think the borg warner plug wires are pieces of ****s.Anyone use them before? Tommorow I will install the old wires to see if the problem is gone.

This post has been edited by mk7celica: May 5, 2009 - 6:34 PM
 
Start new topic
Replies
post May 5, 2009 - 10:08 PM
+Quote Post
Fastbird

Enthusiast
*****
Joined Jun 25, '05
From Fort Wayne, IN
Currently Offline

Reputation: 14 (100%)




Just curious, did you check the gap on those iridiums, and what was it?


--------------------

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: September 12th, 2025 - 6:45 PM