 Front and rear brakes, dumb questuon lol |
 May 8, 2009 - 2:00 AM
|
 
|
 Enthusiast  Joined Mar 22, '06 From Wesley chapel, Florida Currently Offline Reputation: 13 (93%)  |
OK so i have to ask before i go out and start ripping in to the work. I just did the rear brakes on my car i put 97 gt rear disk on my 94 st. I have a complete downer car and was going to change out the front brakes to. I know that i seen a thread about the front brakes being bigger on the gt then the st. So my question is that true and do i have to change spindle and all or can i just use the caliper and bracket with the gt rotors?
--------------------  |
 |
Replies
|
May 8, 2009 - 2:31 AM
|
|
 Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
from what i have heard. you only need to change bracket and rotor. Im guessing you have to change it to the gt caliper. not sure if the gt caliper and st caliper are the same. Also if you can change the proportional valve from the gt into the st. it regulates brake fluid so its puts about 70% to front brakes and 30% . Its not a must that you do it, but it could decrease the chance of your brakes from locking up. not that much of a difference between gt and st proportional valve. gt slightly better by 15%.
-------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
Posts in this topic
twolownissan2002 Front and rear brakes May 8, 2009 - 2:00 AM
twolownissan2002 Well the way i see it im going to make my car a gt... May 8, 2009 - 2:40 AM BonzaiCelica ill give you an exact word for word from my chilto... May 8, 2009 - 3:00 AM GriffGirl pvalve is nice but not necessary, your brakes will... May 13, 2009 - 5:33 PM
twolownissan2002 Thats what i was thinking i was looking at where i... May 13, 2009 - 6:53 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 20th, 2025 - 12:53 PM |