![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() Joined Jun 25, '06 From Box Elder, South Dakota Currently Offline Reputation: 2 (100%) ![]() |
Hello, does anyone happen to have a hose diagram for the 3rd gen 3sgte...recently i have been having a coolant leak coming from my throttle body, and i suspect that i may of re-routed the coolant lines wrong, after re-installing my engine..i have tried swapping them around and am about ready to tear back into it all to figure out whats going on....would be handy to have a diagram though, if there even is one...
-------------------- (\__/)
(='.'=) This is bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() Joined Jun 25, '06 From Box Elder, South Dakota Currently Offline Reputation: 2 (100%) ![]() |
Err not resurect a dead thread, but i found a fix to my problem....seems that one of the two hoses, that run engine coolant through the throttle body, was leaking...BAD!!!
So i just ended up re-routing the lines away from the TB, and into each other...basically connecting them together. Doubt ill have that leaking problem again...oh and i used a new hose! I also hear that i get to enjoy lower intake temps YAHH!! -------------------- (\__/)
(='.'=) This is bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. |
![]() ![]() |
Lo-Fi Version | Time is now: August 19th, 2025 - 10:56 PM |