May 18, 2009 - 7:42 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Apr 27, '09 From West Coast Canada Currently Offline Reputation: 0 (0%) |
Car kinda wobbles a bit at low speed and the wheel vibrates a small bit at 75+ MPH progressively getting worse until about 100, after having my rubber mounted and balanced i drove it and it was horrible, so i took it back and had them rebalance them, they showed me they were 0,0 (100% performance balanced) got back on the road and it continued.
Note: I use to run factory mags in horrible condition and my car ran smooth |
![]() |
May 18, 2009 - 9:29 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
OEM wheels?
Is the center bore of the wheel larger than the hub bore? (does the wheel's center fit perfectly on the hub?) If it's larger you'll need to get some hub-centric rings to get rid of the vibration. For example - My wheels have a center bore of 73mm. My hub is 56.1mm. So I have a hub-centric ring that brings the wheel hub from 73 down to 56.1 ![]() http://www.justforwheels.com/index.jsp?cat...ric&sub=how -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
May 19, 2009 - 12:50 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Apr 27, '09 From West Coast Canada Currently Offline Reputation: 0 (0%) |
OEM wheels? Is the center bore of the wheel larger than the hub bore? (does the wheel's center fit perfectly on the hub?) If it's larger you'll need to get some hub-centric rings to get rid of the vibration. For example - My wheels have a center bore of 73mm. My hub is 56.1mm. So I have a hub-centric ring that brings the wheel hub from 73 down to 56.1 ![]() http://www.justforwheels.com/index.jsp?cat...ric&sub=how they are RTX rims, and yes i am using hub centric rings 73-56.1mm. |
Mstoochn More Problems... Oh yay... New Rims making my car drive horribley May 18, 2009 - 7:42 PM
Nartanian QUOTE (Mstoochn @ May 18, 2009 - 8:4... May 18, 2009 - 7:52 PM
Mstoochn QUOTE (Nartanian @ May 18, 2009 - 8... May 18, 2009 - 8:13 PM
95CelicaST What size wheel and what size tire? Maybe you... May 19, 2009 - 2:45 PM
Mstoochn QUOTE (95CelicaST @ May 19, 2009 - 3... May 19, 2009 - 4:56 PM
99Celica Are the lug nuts torqued? Hey i've seen it ... May 19, 2009 - 8:49 PM
Mstoochn QUOTE (99Celica @ May 19, 2009 - 9:4... May 19, 2009 - 9:33 PM
808celica alignment???
i have put so many rims on my car i... May 20, 2009 - 2:53 AM
trdproven start from your lug nuts and work all the way into... May 20, 2009 - 9:39 AM
Mstoochn QUOTE (trdproven @ May 20, 2009 - 10... May 20, 2009 - 11:01 AM
95CelicaST A warped rim, perhaps. Have the dealer mount your ... May 20, 2009 - 11:10 AM
trdproven find a rim or tire of similar spec or even just a ... May 20, 2009 - 7:16 PM
808celica the faster you go the less you'll feel. May 20, 2009 - 7:39 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 9th, 2025 - 5:57 PM |