May 20, 2009 - 8:58 AM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 3, '07 From Bellevue, Nebraska Currently Offline Reputation: 28 (100%) |
so here's my dilemma. recently my clutch (i think, i'm sure) has been slowly going out on me. when i let off the clutch and smash the gas, i get all engine and no go, 5k rpms in first, and i'm doing 0-15k in about 10 seconds, if i don't have a hill to climb.
oh, and i just figured out today, that it's kinda like the clutch isn't seating all the way. you know what it's like when you let out just a little bit on the clutch, looking for the engine to grab, so you can creep up to the stop line, or to get a start going up a hill? well, mine's doing that when i take my foot off the clutch and my foot off the break, not even touching the accelerator. could it be that i just need to bleed my clutch line, or is my clutch just that shot? and, when i do replace the clutch and pressure plate, does the flywheel need replaced too, or only if it can't be smoothed out? thanks for the help -------------------- ~Andy
![]() Check out my Droid Goodies | My Flickr |
![]() |
May 20, 2009 - 9:23 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
if you have never replaced your clutch until now, it seems like thats the problem. Just keep an eye out for the other parts as well. Good practice is to replace other parts along your way that are a pita to do again later just like ^ said. Most ESPECIALLY when they are hard to get back to.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
stetsonaw clutch problem May 20, 2009 - 8:58 AM
presure2 QUOTE (stetsonaw @ May 20, 2009 - 8... May 20, 2009 - 9:03 AM
stetsonaw manny, what is this seal you speak of? i'm go... May 21, 2009 - 6:53 AM
njccmd2002 this is it..
two ways of doing it. you can do it... May 21, 2009 - 9:36 AM
stetsonaw that's a seal and two gaskets i don't have... May 21, 2009 - 10:13 AM
njccmd2002 if your car is
ST202-BLMZF 08/1995 - 07/1999 ST2... May 21, 2009 - 11:23 AM![]() ![]() |
| Lo-Fi Version | Time is now: November 21st, 2025 - 12:42 AM |