What do you say about the obx manifold???... Options

[miguelst205]

Hi guys..

I want a opinion... what do you say about this manifold????..

http://cgi.ebay.com/ebaymotors/JDM-3SGTE-3...%3A1|240%3A1318

and to fit a T3 flange turbo, with this adaptor of the same brand: http://cgi.ebay.com/ebaymotors/OBX-Flange-...sQ5fAccessories

The T3 turbo in question could be the GT3071R, GT3076R or the GT3582R... anyone of these in .78 A/R Twin-Scroll...

What do you think about this manifold for anyone of these??... or in any way the full-race manifold would be better???

Grettings..

Miguel...

[Cuts_the_Pilot]

thats made for an mr2, yes the flange patturn is the same, but thats a high mount setup and i dont reckon you will have enough bonnet clearance.

plus the wall thickness is only 1.6mm and many people (including a mate of mine) have experienced cracking and sagging of these type of manifolds.

if you want something decent that will last get a steampipe one made. From a proper fabricator, not a "look at this shiny manifold on ebay place".