Installing the T1808 system, Have a premium sound car, need more info Options

[razor7]

Alright,
So I already know that I'll need to kill both amps and run everything off of just the deck itself (though I plan on wiring in a breakout box to send power to an amp that will power 8" polks). Will the stock wiring hook up to the 1808, or will I need to create a pinout connector and work on the wiring some (I can work my around with a soldering iron, shouldn't be too difficult)?

I'm also wondering if anyone has a pinout for the stock mid range amp (the one under the seat). I want to put in another semi-low powered amp in the same spot, and if possible, use the same wiring for the doors.

I have also been reading around and in order to get out the stock amp (next to the climate control) I'll need to tear apart most of my dash and center panels. Is there any special operation/order needed to go about doing this (I skimmed through the other thread, I'll re-check it once I get the radio).

Thanks,
-TC

[pittfirefighter]

ok i think you're trying to do what i did with one of my celicas... i have an eclipse AVN headunit that runs my tweets and 4" drivers in the door as well as the 6.5's in the back, i then have a jbl amp running 8" memphis in the doors and a 12" in the hatch?? is this kinda the setup you're trying to run?

if it is, i will go into detail on how to do it, also the amp under the seat ONLY powers the 8" drivers in the doors

This post has been edited by pittfirefighter: May 28, 2009 - 8:15 PM