![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 29, '09 From Gainesville, FL Currently Offline Reputation: 17 (100%) ![]() |
Havn't been able to find a answer to this one. When i take off in 1st at about 2000RPM the vehicle shakes violently, but continues to move forward, stops after about 3 seconds. When i say shake, its more like the car is jumping off the ground and slamming back down within seconds of it self. I assumed it was the clutch slipping. Clutch is brand new though =(
What i have been doing to make it not do so, is get her going slowly let the clutch fully engage drop down to about 1000rpm, and its fine if i do it that way, no shakes at all. Doesn't do it either if pop the clutch and take off, only on progressive take off. Sounds more to be vehicle error then driver error, but ya never know. Any idea guys? |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Oct 7, '06 From wyomissing pennsylvania Currently Offline Reputation: 2 (100%) ![]() |
on the stock 14's that lil 1.8 is plenty capable of spinning them "thin" economy tires when just gunning it from about 2k rpm (not clutch kicking it, just from what torque it has)
i would say is most likely your problem. like bitter said, new bushings n mounts should make that car tighten up like new :thumbsup -------------------- you know why they put sheep at the edge of a cliff.... that way they push back!
![]() ![]() ![]() ![]() (2:27:32 AM) edit: please f*cking work, f*ck, sh*t, piss (2:28:08 AM) edit: that did the trick |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Jul 24, '08 From Canoga Park CA. Currently Offline Reputation: 0 (0%) ![]() |
on the stock 14's that lil 1.8 is plenty capable of spinning them "thin" economy tires when just gunning it from about 2k rpm (not clutch kicking it, just from what torque it has) i would say is most likely your problem. like bitter said, new bushings n mounts should make that car tighten up like new :thumbsup Mine does that sometimes when it I am in heavy L.A. traffic but seems to work ok. My clutch and tranny are very old though. |
![]() ![]() |
Lo-Fi Version | Time is now: September 10th, 2025 - 2:37 PM |